mutoh

We have a 1624 here at the shop and the black subtank will not refill. I performed a valve check for the subtank and you can hear a click when this is done. All of the other tanks fill up just fine but the black is almost sucked up tight. Also, I have almost zero black steps on the nozzle check...

Hello. Having a little issue. Changed the maintenance station 2 weeks ago ( second one in 6 years, not bad ), printer worked great for the 2 weeks. Yesterday, went to print and barely had color down on media. So no problem I thought, seen it before... took the capping off, cleaned all the tubes...

My black nozzles keep fluctuating wildly between cleanings. Printer has new dampers and o rings, new cap top on the maintenance station also new print head, cables and maintenance station within the last few months. I can't seem to figure out what is causing this. There is ink flowing through...

I am having some trouble with my 1938tx, original the print head 2 wasn't printing, I swapped the print heads from head 1 and 2, and the same channel printed so I knew that the printhead was still good, since now print head 2 was printing 100%. So than I changed out the mother board, and...

Hello all - Looks like we have lost almost a full black ink channel in one of our 1624's. Has anyone here replaced a head by themselves before - and do you think this is what needs to be done? We just put in a new maintenance station around a month ago. Nozzle check comes back great with the...

Hello! I'm having issues with my Mutoh 1624x printer not printing the correct size. Right now I'm trying to print corn hole board wraps so I need the print to be 48x24 on the dot. I just printed a set and they seem to come up short on the vertical end. I've tried messing with the size...

Hello, I havea problem. I saved parameters from old main board After install new main board i see clear display. Can you help me this problem? I need transfer old parameters to new main board Please help!!! Best, Mike

I am looking for Mutoh 1324 printhead(s) I picked up a couple printers that had sat for a while, both function other than almost no ink at all coming from one, and only cyan and black working from the other with a hint of magenta and yellow. Ive tried cleaning, and its time to just buy a new...

Hey guys, I_ve got issues with my #1624. My prints were banded, so I performed nozzle check. #Nozzles were ok, but #banding didnt dissapeared. So, I took loupe and look closely to nozzle check pattern. I saw that horizontal lines were ok, but vertical lines of cyan were misfired. So i decided...

Hello, After trying to change a head in my Rockhopper I have the following error: E118 Head Overheat 3. I checked the error codes and saw that it has to do with the head cable. I changed the cable with a new one but again the same error. Any advice on this one???

Selling our Mutoh 1624 64" solvent printer along with LEGAL copy of Flexi Sign & Print installed on a RIP box and our US Tech 65" wide format cold laminator. Mutoh is just over 3 years old with take-up reel, PERFECT nozzle check, not 1 nozzle missing. (See pics) Prints banners, posters, car...

Hello to everyone! I have a problem in printing magenta and cyan on my Xerox / Mutoh machine. I have done all proper maintanance, also changed dumpers but problem persists. Do you thing it is the print heads? It's been 4 years since i changed all of them and now it would be hard for us to buy...

Hello and thank you for taking the time to read this... I know that I'm using a cutter so old that it has started to take on a "vintage" status (wait til you hear about the printer). So, back to it. Trying to keep up with the times I thought the whole world of contour cutting could be just...

Hello friend, any can help me, i need buy a manifold for dx5 but must be for mutoh vj 1204, my head is new but i broke a needle of the manifold and buy new generic but is not the same. all my parts i buy in the digiprint-supplies but now they don't have. any can help me to find a store for buy...

Good Morning, I have a Mutoh Valuejet 1608 Hybrid. I keep getting this (E150 err Airheat TH. L.) . Looking for any suggestions/ info regarding this error. Someone said it might be the sensor but having trouble location that sensor.

Hi ... Yes more issues with the Mutoh Valuejet 1608 Hybrid. I finally got my computer/software to communicate with my Mutoh and I can print! However the black ink is not working/printing. Any suggestions would be greatly appreciated.

hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...

Hi my name is John, I am working on getting a Mutoh Valuejet 1608 HS up and running but I keep getting a few errors that I can't seem to find any info on. The first error is (undefined media) ... I got past this error the other day and got the machine to read the media as coroplast, however...

Do you run bulk inks or cartridges?

Do many of you run bulk ink systems or cartridges?