mutoh

Hello! I'm having issues with my Mutoh 1624x printer not printing the correct size. Right now I'm trying to print corn hole board wraps so I need the print to be 48x24 on the dot. I just printed a set and they seem to come up short on the vertical end. I've tried messing with the size...

Hello, I havea problem. I saved parameters from old main board After install new main board i see clear display. Can you help me this problem? I need transfer old parameters to new main board Please help!!! Best, Mike

I am looking for Mutoh 1324 printhead(s) I picked up a couple printers that had sat for a while, both function other than almost no ink at all coming from one, and only cyan and black working from the other with a hint of magenta and yellow. Ive tried cleaning, and its time to just buy a new...

Hey guys, I_ve got issues with my #1624. My prints were banded, so I performed nozzle check. #Nozzles were ok, but #banding didnt dissapeared. So, I took loupe and look closely to nozzle check pattern. I saw that horizontal lines were ok, but vertical lines of cyan were misfired. So i decided...

Hello, After trying to change a head in my Rockhopper I have the following error: E118 Head Overheat 3. I checked the error codes and saw that it has to do with the head cable. I changed the cable with a new one but again the same error. Any advice on this one???

Selling our Mutoh 1624 64" solvent printer along with LEGAL copy of Flexi Sign & Print installed on a RIP box and our US Tech 65" wide format cold laminator. Mutoh is just over 3 years old with take-up reel, PERFECT nozzle check, not 1 nozzle missing. (See pics) Prints banners, posters, car...

Hello to everyone! I have a problem in printing magenta and cyan on my Xerox / Mutoh machine. I have done all proper maintanance, also changed dumpers but problem persists. Do you thing it is the print heads? It's been 4 years since i changed all of them and now it would be hard for us to buy...

Hello and thank you for taking the time to read this... I know that I'm using a cutter so old that it has started to take on a "vintage" status (wait til you hear about the printer). So, back to it. Trying to keep up with the times I thought the whole world of contour cutting could be just...

Hello friend, any can help me, i need buy a manifold for dx5 but must be for mutoh vj 1204, my head is new but i broke a needle of the manifold and buy new generic but is not the same. all my parts i buy in the digiprint-supplies but now they don't have. any can help me to find a store for buy...

Good Morning, I have a Mutoh Valuejet 1608 Hybrid. I keep getting this (E150 err Airheat TH. L.) . Looking for any suggestions/ info regarding this error. Someone said it might be the sensor but having trouble location that sensor.

Hi ... Yes more issues with the Mutoh Valuejet 1608 Hybrid. I finally got my computer/software to communicate with my Mutoh and I can print! However the black ink is not working/printing. Any suggestions would be greatly appreciated.

hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...

Hi my name is John, I am working on getting a Mutoh Valuejet 1608 HS up and running but I keep getting a few errors that I can't seem to find any info on. The first error is (undefined media) ... I got past this error the other day and got the machine to read the media as coroplast, however...

Do you run bulk inks or cartridges?

Do many of you run bulk ink systems or cartridges?

Hello all- We are all a little confused here at the shop. We have two 1624's, both have the material take-up reel/system (VJ-16TUP30U). On our oldest 1624 (somewhere around 6 years old, still going strong), we are having an issue where the take-up reel is askew. It is causing the material to...

A couple months ago I started losing black nozzles on my printer after a few head soaks and cleanings it was back to normal. It worked great for one print then just started dropping nozzles like crazy immediately afterwards. Ended up replacing the capping station, printhead, dampers and print...

Mutoh VJ-1624 Eco Solvent Printer with 1L Bulk Ink system as well. It runs aftermarket ink without any issues. I have a smart card programmer to go with along with source for ink for $130 Liter. At the moment it is in need of a maintenance station but isn't hard to put in about $400 to buy one...

I'm running 3 printer Mutoh 1624, Wasatch Rip and Mutoh UMS ink, suddenly one printer started over sparying cyan specially where there is high contrast in the printed image. What ever the media, whatever the file. Nozzels check is perfect, encoder clean, capping station new, every thing that can...

Hi Guys I am vinyl sign maker. Recently I acquired a Mutoh VJ-1614 (It is actually re-branded as an Oce CS9160 but is the same printer) It has an Error "E085Err Heat Head" From my research it seems to be cause by a faulty CR board or main board. Problem is I can not find these parts anywhere, I...