mutoh

We have Mutoh Vj 1604 that had a new print head installed around 3 months ago, during printing it just stopped firing ink? it goes through all the motions but no ink on media. we tried a nozzle check and nothing. we tried everything to no availe. Inks Charge and head is clear so not that. We...

Hi guys Is it possible to change the (defective) mobo from My Falcon 2 64" with a Spitfire mobo 64"? In My Falcon, when rip while print, Printer is only Taking Data very very Slow via Ethernet. (Checking via task Manager in windows, Printer is the only device on the Switch - Same Thing Using...

Mutoh 1624. Been having a sporadic problem with the large fields of color (solid or gradient) coming out with slightly different tones from panel to panel. Looking at it close you can see the print pattern very tight and clean on a panel and the next will have a very grainy look to it causing...

Hi guys, I currently own a Mutoh eco-solvent printer and am hoping to purchase another printer in case my Mutoh ever has any issues. What 54" printer would you recommend for printing wallpaper on wall fabric? Currently I print on wall vinyl which takes a while to dry, and will scratch if I...

I bought a used Mutoh VJ-1304 assumed that finding a printer driver wouldn't be an issue, but now it's an issue... I have registered on Mutohs site but still cannot access the printer driver download page, can anyone direct me where to get the print driver for the VJ-1304? Thanks!

Hi guys, This is my first time using Signs101 and I am kinda in a huge jam. I have a Mutoh VJ 628 printer, and today 2 error messages came up that I have no idea how to fix. In my Valuejet Status Monitor it says: "No Media" "S/C Card Error No: 56" I have a new roll of media in the printer...

Anyone ever had trouble with the Page Feed motor on a Mutoh? About a month ago I started to notice a thumping sound when advancing media through he printer. Then one day I noticed about 1 inch wide strips across the print that I could definitely see the wave pattern. These areas would show up...

Over the course of a couple months I started having banding issues and started having trouble printing red and started getting mixed ink dropping in puddles and splatters on the edges of the media. When preforming a nozzle check I'm missing a lot of nozzles on each channel except one. After the...

A couple of weeks ago my VJ 1604 started missing nozzles and when starting a print it would be really saturated for the first inch or so and then the print seemed to get a faded look, I did a couple of head soaks and cleaned the maintenance station and started printing at 1440x720 and it seemed...

Hi all, As being new to the DX5-printhead-"compatibility"-concept i was wondering if anyone knows if an R800 or R1800 DX5-printhead would work on a valuejet (apart from the manifold which clearly needs to be replaced by a solvent-version as wel as the rubber gasket between the head and the...

Hello guys, thanks for all the tips and advice in advance. Here is the situation. My mutoh 1638WX had an ink leakege from the spitting box going down all the way to the mainboard with only 3 months of use. We are using J-teck Italian inks for sublimation. The problem here is that we've called...

Hey Guys, So my problem is that i lost my cd for FlexiSTARTER ValueCut Edition v10.5 that came with mutoh plotter. i have my usb key and tried to contact mutoh and sai both could not find the program. even gave me backdoor logins to find it and no luck. does anyone have a copy they could...

Hey Guys, So my problem is that i lost my cd for FlexiSTARTER ValueCut Edition v10.5 that came with mutoh plotter. i have my usb key and tried to contact mutoh and sai both could not find the program. even gave me backdoor logins to find it and no luck. does anyone have a copy they could...

I recently acquired an old Mutoh MC-1300S. It had some problems with the page sensors, but that is solved. Now I see there is a problem with the sheet cut off feature. On the left side there is the knife to cut the page. But looking in several service manuals I see there is a part missing...

Hello, we have a ecosolvent printer Oce CS 9160 and we are thinking of buying a new printhead. The problem is that when I looked online for a oce CS9160 printhead, I can't find one ! When the machine starts, it says MUTOH Valuejet 1614, so I suppose the head is DX5 (at least it looks like). I...

Have had this machine for about 3 years and have already replaced 3 heads due to "clogs". It always seems to be the red ink. Last time, I had problems with the blue and I started cleaning manually and automatically, after a few tries the blue mostly came back but I completely lost my second...

Hi everyone, We've been running the Mutoh's through FlexiSign Pro for years. While each ValueJet prints color slightly differently (even when using the same profiles), they handle color pretty consistently. We have recently added a Roland and would prefer to continue printing and cutting...

I have sent off a few messages but most of the posts are from 2013. Can someone please send me a service manual to a mutoh valuejet1204?? Please! :) victor@cascadeglassnd.com

Hi, I have a mainboard from Mutoh 1638W with a non-working ethernet port. Does anyone know if there is a company or some technician that could repair #broken mainboards?

$5000. New print head installed in December of 2015. We just upgraded to a new Mutoh 1624X. This machine has always been cleaned and maintained with genuine Mutoh parts. We have ONLY run genuine Mutoh inks through the entire life of this printer.