roland

Hi guys I am new to the sign making world and to print and cut machines. Getting on well so far learning myself as I go. So noticed after doing quite a few print, laminate and cut stickers that there is always a part of the sheet where the knife hasn't cut through properly, you notice when...

I am running a roland versacam sp300V, I want to upgrade computers and software, I have been running flexi 7.6 on a windows 7, 32 bit computer. but new computer will not allow the security key to install?? but the software installs fine. installed corel, prints nice but adding inside/outside...

I just upgraded my PC to Windows 10 and my CorelDraw to version 2019 64-bit. I ran through all of the instructions for creating the CutStudio plugin icon but when I click the icon, nothing happens. I pasted the .gms and .bmp files into the GMS folder in Program Files and in the GMS folder in...

Hello, we are printing on Roland and cutting on a Summa. When cutting nested jobs the order it cuts is so random it causes issues when perf / flex cutting. In general the flex cut feature cuts random. We would prefer it cut in the same order as our Rolands. Is there a setting that forces cuts to...

Hi, due too little space I need/want Print and Cut in one unit.. for sign and stickers print.. Im looking at Roland TrueVis VG2 or Mimaki JVC 150 series...(or is there any other brand out there?) Does someone have pros / cons on these -Thank you -

We just retired our Roland printer but still have a Roland plotter. Other two printers we have use Onyx Thrive RIP. Can't get this to work for our Roland plotter. Briefly had it almost working except double cut everything. Anyone else have this issue? Techs seemed stumped. Hate to have to...

We are using a Roland 54 inch. When we print from Versaworks blacks are great. We use 60/60/40/100. When we print the same job out of Flexi PM using several profiles we just can't get rich blacks. Any suggests or settings that could help. There are so many settings and just not enough literature...

Where do you get your jigs?

I bought this Roland SP300V and I fired it up just to see if it would print anything, and after basic issues I got it to run a very fuzzy System report, so I Purchased 2 new printheads, ranked, and new dampers, caps, wipers, and pads, I replaced all the parts like I have done before on a VP540 I...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

Good Morning, Do you use a different profile for each type of media you print on? Do you have any across-the-board profile types you recommend for optimal printing? Could different profiles be the answer to color specific banding? Have you found that generic (or random) profiles deliver...

Hi All, Anyone knows if you have to use 2 Felt Wipers and 2 wipers on Roland XR-640 ? I've bought used XR-640, currently having 1 felt wiper and 1 wiper set up and 2 empty slots for additional felt wiper and wiper. Is it supposed to be this way or I should be running it on 2 felts wipers + 2...

Good afternoon everyone. Just starting this morning, I've been having issues printing on my XC-540 Soljet printer. It was working fine before the weekend, but after running a job through, the print comes out misaligned and blurry. After trying a few calibration fixes, I cleaned the encoding...

I'm not very comfortable performing maintenance on the machine outside what's in the user manual. We're in a rural community 5 hours from the nearest distributor, so having a tech come help with stuff is too expensive. Does anybody have a link to a ho- to video for changing an encoder strip? Or...

My favorite part about the roland truevis vg-540, as an upgrade from the older models, is the TU2 setting. I'll print signs and vehicle wraps all day on the regular roll setting, then at the end of the day, set up a bunch of product labels (that have small text and print slower on a high quality...

Been having some banding issues on the Roland TrueVis Vg-540. Today when calibrating the machine, the correct setting was a moving target. it was set to ten, which had a little overlap. Twenty looked good so i dialed it up. Next test print, twenty had a little gap and ten looked right. Set it...

About 2 years ago i was hired and the company bought a truevis vg-540 to replace the soljet xc-540 as our primary machine. The soljet is about ten years old and has issues now, but the way the boss tells it, this machine has been incredibly reliable and easy to use getting great results with...

Can not seem to get mt versacamm sp540 to print teal, Maybe other colors missing aswell? Will post a test print and other pictures of whats happening. PLEASE HELP!!! test print seems to be fine im trying to print a bright teal and lime green, although it doesn't look like it in the picture of...

Hi All, I hope someone can help me figure this out. I've owned this machine for a month and have yet to print anything! What I'm trying to work out is how to connect my SP-540v to my computer and have it be recognized in Versaworks. This particular unit has black plastics, as opposed to every...

I’ve been having some issues with the heads on my sp300v, tried cleaning them but m/y head had nothing coming through and the blue was 95% clear and the black was about 40% on a test print. Decided to just buy 2 new heads with new dampers and cap tops (I could’ve cried after the deceiving...