• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

sensor

  1. This Old Roland (LEJ-640FT) - Service Call 0212

    I got a "Service Call 0212" error message, and after reading the manual, I got nervous. Here are the possible causes listed for this error: I got a quote for a set of new UV lamps for about $8K. Fortunately I don't think that will be necessary. I did some testing and from what I found, I think...
  2. Am I able to print a 24 inch wide roll on my Mutoh 1624 ValueJet?

    I have a 24 Inch Wide roll of this Holographic vinyl material. I covered the senor under the pinch rollers to make the machine think it's filling in the width. How can I set the media on the machine to recognize its shorter and also to get it to stop saying undefined media?
  3. Undefined Media

    Hi, My company has a Mutoh ValueJet 1638. When I go to set up a media type it just automatically gives me the "Undefined Media" error without even bothering to measure the media thickness or width. Any idea on how to remedy this? Thanks
  4. Plotted Electrocut Film

    We have to make a couple of large street name signs for a Signal Project. One sign is 2' by 11' and the other one is 2' by 7ish'. Anyways, we normally outsource this but i was wanting to do this in-house. I laid the White HIP on an aluminum sheet and then plotted some green electrocut. First...
  5. Question Length limit of print & cut on Graphtec?

    Hi ya all, Having a print & cut issue, sending the file that is about 8ft long, laminated to the Vinyl Express (Graphtec). Have plenty of space in the sides, etc. but it is refusing to read the last set of marks at the bottom of the file. Tried putting some matte scotch tape, etc., just in...
  6. Roland RS 640, 0102 service call

    We turn on our Roland RS640 and straight away a message come up press power key to clean. When we press the power key after a few seconds the carriage motor seems to lock up. It does not matter if the carriage is in the home position or up the other end. We then get the service call 0102 message...
  7. Replacing Roland SP 540v Encoder Sensor

    Hi guys first post have a tiny tiny bit of overspray on black head. cant work out if it's encoder or static. changed encoder strip about a month ago due to poor printing and it cleaned it up a lot. have a spare sensor I want to put in but can't find instructions on replacing it have the user and...
  8. Banner material Bubbling- Mimaki JV33-160

    We primarily use our printer for canvas but every once in a while use for vinyl banner. PROBLEM: The 12 oz vinyl is bubbling and the printhead sensor is touching as it passes. Any suggestions?
  9. rj 900 cartridge "non original ink"

    Hi guys, I have a problem with my mutoh rj-900. Im setting up 4 new cartridges that are without the reflective stickers and the printer give the error "non original ink". Somebody know how I have to put the sticker on the cartridge?? How shouled the 2 sensor in the cartridge assy read the...
Top