sp300

Hello, I have a Roland sp-300 that has some issues that i would like to get the community's input on. This is the first 2 prints This is the 6th print a lot has cleared up but still having the following issues Issues: Magenta and Yellow print lines, see attached images. Magenta will leave...

I have a Roland sp300 not printing My wife died 3 years ago and this printer has been setting since then. I'm sure the print heads are all dried out. Is there anyway I can recover and start using this machine again? I am pretty good and doing and repairing my own electronics. Is this a project...

I'm getting strange results from the service mode test print (see attached). Cyan seems fine in the standard test print, but when printed in service mode it has a wavy column with light coverage in the middle of each pass. Has anyone ever seen something like this? Cyan is showing signs of ink...

Hi Guys, I need some help iv got a SP300v Iv had for years, they'v been brilliant but a few months ago I come back to work and it had emptied 2 of the ink cartridges all over the floor by where the waste bottle is. if its related the two ink cartridges were really hard to remove. I spoke to...

Hi Everyone, Getting very frustrated. i have a Sp300v. I have tried everything I can think of to getting it printing properly. My greys print light pink. No colors come out correct. I use Roland ink. The only thing that has changed is that it was reset to factory setting, after a head change...

I appreciate any info I can get. My problem exist somewhere. Basically, my cut pressure is going away. Where I use to cut htm2 vinyl at 50 grams, i'm now at 95 and when Im trying to cut 3 mil lamination, it barely cuts trough it. Then of course when I cut 11 mil and above for MX graphics, it...

Hello everyone, need help with a strange issue I can't seem to diagnose. I have a Roland SP-300v Versacamm. Our blue and black print head stopped working so we did diagnostics. After many tests of continuity on ribbons and syringing for clogs, we finally figured out it was a motherboard...

My machine is out of warranty and due to being down for quite sometime we had to soak the heads. I found lots of great advice researching the forums. I'm having a few common problems. It would be great to have the service manual as a guide. please contact tomx1138@yahoo.com if you have one or a...

Hi guys, I am truly hoping you can help. I have searched message boards everywhere and nothing works. I recently got a printer and started my first job on it. Print, lam and cut. I have prior experience so I am not a complete newbie. I printed with crop marks, laminated the job and brought it...

Here is the deal everyone. I bought a used SP300V. I am new to Rolands and somewhat new to printing. I am reading in the manual to install 2 cleaning cartridges and 2 dummy cartridges. I only received 1 dummy cartridge and didn't have any cleaning cartridges. I ordered 2 cleaning cartridges...

Hi. Ive setup my sp300 and ive got perfect testprints and ive also setup the bidirectional correction so it looks good (i think). But! Im still getting magneta and cyan outlines/shadows, especially around black(dark) colors. Using colorip 2.2. Generic PVC2 mode/hi quality. Oracol 316g...

:U Rock: I wonder if someone found a good profile for printing small high quality decals. I mean of course the standard profiles provided by roland mainly.

Not sure where to start or where to post this but since this is my first post, I'll try to make it quick. My Pop and I are purchasing a Roland SP300 and I am wondering which version of Signlab will suit our needs best. This is our first printer/cutter. He is proficient in SL ES2 for cutting...

For all of you Roland SP300 owners that have found what works good and what doesn't. I am working on a 3 year financial spreadsheet for my business plan and want to include supplies. I realize that some media is probably great for a lot of different things. Which media and size are you using...