uv printer

Dear friend I lost the Dongle of my wall printer And I need to buy new Dongle. However, I don't know the board manufacturer. Anyone can help me to know the board manufacturer in order to request new Dongle. The printer equipped with UV double Epson Tx800 heads. Please refer to attached photos...

So we just purchased a CET flatbed printer and we have ran corrugated on it no problem all day. Well today I had a customer who wanted a map on foam board, I decided to give it a go and no matter what I do the print head strikes the edge of the board, usually right a the end of the print. I...

Has anyone tried printing directly onto yoga mat material? We're thinking of printing directly onto 5 or 6mm thick yoga mat material. It is not coated for ink adhesion like most of our printable substrates. We currently only print on to smooth substrates, so I'm wondering: Can we print...

I'm currently running the HP latex 335 and thinking to get the ucjv300. The reason is to print white and clear. I mostly design for customer so if I can print white and clear then I can also offer something new. My questions: -How hard is the maintenance? -How temperamental is this printer...

Mimaki UJF-3042mkII UV flatbed printer for sale. Purchased in mid-2017 for internal production and prototyping, only lightly used. Well maintained and regularly cleaned. Currently using LUS-120 inks. 3-head, 6-color CMYK-WP. Includes: Rasterlink6 RIP software Vacuum Table LUS-120 ink set...

Hi, We do decals and backlit signs. We have a Roland VG2-540, it prints great on 3M IJ180 vinyl. But the inks scratch easily and we have to wait 24 hours before cutting into bleed. I'm thinking of getting a UV roll to roll printer (probably Mimaki UCJV) to overcome these problems. But 1)...

I have a Roland LEC-300A UV Printer and I'm curious, does anyone know if the gloss channel can be converted into a second white channel? This model is a 3 head / 6 channel (CMYK+WG) model. I'd like to set it up for white (I exclusively run a product that i could be running with white every...

Looking at purchasing a new or slightly used UV printer that will least print 4' by 8' panels. Fan of the Roland line, but at 90k for the flatbed version, I am open to other brands. Anyone know of a brand that has done you well, but costs less. Thank you kindly.

I'm looking into purchasing a mid sized UV flatbed printer and have been seeing the XANTE UV4000 - anyone here have one, heard anything about it? It's the perfect size. I don't really need a 4'x8' printer for what I make. Any advice would be greatly appreciated.

Canon/Oce offers a pay per SF plan as an option vs purchasing the printer. The pay per use plan over 5 years, ends up being quite a bit more than purchasing the printer and consumables, however it gives you the peace of mind that the heads are covered under this plan. If you have a Canon Oce...

American Printing Systems (APS), headquartered in Wharton, NJ, has been appointed as the exclusive distributor of Flora UV printers in the United States effective September 1st 2018 by Shenzhen Runtianzhi Digital Equipment Co., Ltd, the makers of Flora UV Printers. APS was started by Dave...

Roland UV LEC-330 The machine is 100% functional and in great condition. Upgraded to ECO-UV4 ink in 2016. Low hours on the heads and consumable parts. Ready for operational inspection Includes VersaWorks 5.5.1 RIP Software Located in Chicago, IL Includes: A set of large and small media...

Model Direct Jet 1024UVHS with heavy duty direct drive module. Single owner, purchased in 2014. Includes software, dongle, ink, cleaning kit, and everything required to print and maintain. Repaired and refurbished in October 2016. Was in full working order before being crated for shipment...

Does anyone know of a way to cut down on the noise that the vacuum creates, it has become really annoying. I FEEL LIKE I'M GOING DEAF!!!!!!!!!!!!!!

I've got a UV printer. I need to replace some of the black tubes going to the dampers. I also need the rubber o-rings at the brass fittings. Do you know where to get these? My local small town hardware store doesn't seem to have these.

Aloha All, I'm considering leasing a small UV printer. Here are my requirements... Good image quality and adhesion on plywood Don't need texture Print area at least 24" on the longer side. At least 10" on the shorter side. Service provided to Hawaii Here are my questions... What machine...

Does anyone know the proper size of the ink tubing used on a gen4 head? Lots of sizes in tubing out there and don't want to use the wrong size!

I have a Mimaki JFX200 flatbed printer. The table itself has some ink buildup on it. Im trying to get it clean. Ive used alcohal, screen wash, and windex to try and cut the ink but nothing seems to work. Does anyone have any ideas of anything that they have found that works good? Thank you.

Hi There is a anapurna m Agfa printers. Not start printing I tried Onyx 10 and Colorgate7 connect ok I send a job I have not done anything . When I take it out online from You ask the printer / Print terminate ? (Enter reason ) no esc What could be the problem? The PC is connected directly to...

Hello, My name is Dustin, and I just got a job at a shop that makes handmade goods in Honolulu, Hi. We use a CET X-PRESS 500 flatbed printer. I have been working with it for 2 weeks now and have learned a lot, but still have a LONG way to go to perfecting this neat skill. When I started, the...