versacamm

I don't know what is causing this but my Versacamm SP540V all the sudden started printing all crazy. Straight lines are blurry, and they start printing on an angle. I actually (thought) I fixed this last week when I cleaned the decoder strip, but now it is back. I am scared to ask what this...

I have an older Versacamm SP300v. It has worked fine and printed friday night with it. I came in this morning and hit test print, display said now heating and never warmed up all the way. I turned off the main power, waited, still same. Checked the 2 main fuses which were good. In the menu...

Hey everyone, I'm running a VS-540i with a CMYKcmk ink setup. I'm trying to find print profiles for VW for my printer, but Roland's profile center has next to nothing for this ink setup. The last shop I worked at ran just a CMYK setup, so this is new territory for me. So here's my 2-part...

Used Roland Versa CAMM SP540V for sale. 54 inch print/cut. This unit is in good working condition, we just no longer need it for our business. Includes the Versaworks RIP software, service manual, and service history. Detailed history report available upon request. Asking $6500. Located in...

My machine is out of warranty and due to being down for quite sometime we had to soak the heads. I found lots of great advice researching the forums. I'm having a few common problems. It would be great to have the service manual as a guide. please contact tomx1138@yahoo.com if you have one or a...

FOR SALE $6000 - 54" Roland Versacamm VP-540 with Automatic Material Take-Up System Works perfectly! Must sell FAST to help family member! Some Ink and Materials Included. Email me and I can send you a video I recorded this week of it printing and winding up finished print. Email...

Excellent condition, extremely low hours of use. Comes from 1 man shop, Has been serviced by Roland techs from Pacific Coast Sign Supply since day 1. I can get the report from the tech on usage. Never had a problem. Comes with take up reel. $9995 Located in Portland Oregon. Thanks Joe...

Hi there, I'm planning on buying a Versacamm VS-540i. I have two questions: 1. Is there any way to send a file (pdf?) to print remotely via ftp and/or e-mail or integrate the order directly from e-commerce site to Versaworks or any other RIP? 2. Similar but different, any way to remotely send...

Currently on Ebay.. below is the link.. thank you! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=141229071468

We have upgraded to a larger printer and laminator. We are selling our SP300V. One head was replaced in the last year. All maintenance and cleaning has been accomplished within the last three months. The printer comes with Versaworks Rip software. We also have a 30 inch Coda cold laminator...

The black/cyan head in my SP300V was deflecting the black exceptionally bad. The machine worked very well, otherwise and the cyan nozzels were perfect. I did a heak soak, head flush, changed the dampers, capping station, and no improvement (also put in all new roland ink cartridges after the...

I'm hoping someone here can help me... My printer is having issues with cyan lines appearing in my print. They always appear in the same place (below the roller entry slot). It's not the encoder strip, this has been cleaned and flipped 180. (the lines should now be on the left hand side of...

Good day all, I am looking for a giude that will help a newbie that never operated a printer to setup and print. i have bought a roland SP-300 printer with only usb connection output. and all i got with it is the ink and Versaworks Dongle, no software cd. i am not sure how to start. i have a...

After a couple of cleanings and manual cleanings. How much trouble am I in?? When there's deflection like in the Black and Cyan test print is it curable or do you have to replace? Also the wavy portion on the magenta just started happening. Thanks for any help!

I just got a Versacamm SP300V. I have a job that I need to print today (4 decals) and the customer needs them yesterday. I just ran out of vinyl for the versacamm, my question is this....Can I just print on my 24" white roll that I normally use in my plotter to print on?

My versacamm quit being recognized by VersaWorks. I've read that removing the virus scanning software will fix it, but nothing seems to work. I have a sp300, so it has USB connectivity only. I've tried different cables, removing and reinstalling VersaWorks, and anything else I can possibly think...

Hello everyone, I need to cut out an Eagle logo for a current job I have. I use signlab8, versaworks and a VersaCAMM VP-540. I "counter cut on/off" the eagle outline in signlab, then export it to a folder and afterwards open it in versaworks. The problem is that after I open it in versaworks the...

Hey Guys, I'm buying a new printer and I have to decied between these 2: Mutoh value jet 1614 with flexi Roland VS640. Which one would you go with? I print general signs, banners, carwraps. Which is friendlier? Colorwise wich one is better? Suppliers? profiles? Thanks a lot!

I have a Versacamm SP-300V (w/versaworks), and a Roland GX24 (w/cutstudio). I need to print on permanent vinyl w/registration marks, apply to 30mil car magnet, and then contour cut. From what I have read I shouldn't try to cut the 30mil magnet with my versacamm, so I want to cut it with the...

Does anyone know how to get into service mode? I've tried lots of arrow combinations and I am getting the message "service mode protected" We are having weird sequences of error messages. I called our tech a week ago in MA. He was too busy to come to Maine, then he was on vacation. He was...