xr-640

XR 640 Stops printing midway and screen reads "processing. The resumes printing and stops and repeat

Yesterday it was fine, then this morning when I began to print I saw a lot of ink being dripped and trailed over the vinyl. I think it is a damper issue, not 100% sure though, if its a damper issue is that something I change out or should I schedule a tech? Thanks

So one of my rolands is giving me trouble. Both are getting a bit long in the tooth so I figure I probably have a bad head...but I'll take any advice if someone has a solution. I've already cleaned the head, checked the ribbon cables, looks like the head is attached to everything properly...I've...

Hello All, I'm experiencing cutting issues in one specific approx. 6inch long area (range), that can be seen highlighted in GIF below. Outside of the highlighted range printer cuts excellent, within the marked range it does not cut all. Also I've noticed if I'm setting the base point and I am...

Hello All, I've just printed on my XR-640 on Phototex wallpaper media. I've noticed this horizontal line about one third from the bottom that should not be there. I've never had this before, after reprinting artwork, this line is gone. But I'm still wondering what could the reason for this to...

Hi All, Anyone knows if you have to use 2 Felt Wipers and 2 wipers on Roland XR-640 ? I've bought used XR-640, currently having 1 felt wiper and 1 wiper set up and 2 empty slots for additional felt wiper and wiper. Is it supposed to be this way or I should be running it on 2 felts wipers + 2...

Hi All, so I am new in print & cut and looking to get used Roland XR-640. Just got test print and history report from Roland that I might be buying, all attached. There are few questions that I would like to ask a more experienced people as most of you are: - This machine runs on 2 x DX7...

Hi All, Can anyone advise me how can I pull history report from Roland XR-640? I am newbie in print & cut, previously I have been working with vinyl cutters only, but looking to get into printing as well, so I'm checking used XR-640 in few days time and would like to get understanding of print...

Hello, Im selling my Roland XR-640 printer that I purchased brand new in 12/7/15. I'm asking a fair price of $19,500. I'm in the Window Tinting business and so I originally purchase to supplement my business with vehicle wraps. After a tough decision I decided that I'm looking to go a...

Hi everyone, I'm planning to move my XR-640 to a new location. I keep the printer in my basement and it has a narrow exit. We need to tilt the printer in order to get it out of the basement. I called the Roland dealer in my area and they told me that they won't help me moving the printer. They...

If you are looking at this printer, you likely know about the XR-640, and want to buy one in excellent condition at a fair price. Well, this is it. We bought two of these printers at the same time, just over 2 years ago. They were invoiced on 12/17/2013 from our local Roland dealer. The...

Has anyone found the best profile/settings for printing on Envision specifically with the XR-640? My prints are not turning out crisp and vibrant like they need to be. I've been testing out different settings, but nothing has worked yet....I'm scratching my head over here.:frustrated:

We just brought 2 XR-640 Rolands and both seem to have the same issues. We also have an LEJ-640 and an LEC-540. We print on nothing but 7mil Permanent Stick clear vinyl and 7mil Static Cling Poly. Both are clear. Both run white on every job. For what we are doing, the media clamps and takeup...

Roland Just started printing streaks. It looks like the head is hitting but it is not. My employee performed cleanings both automatic and manual. Any ideas? TIA

This is my first post on these forums. Hopefully you all can help me out. I have a constant issue with printing when it comes to glossy vinyl. It doesn't seem to matter who makes it or whether its cast or calendared or anything else. But it seems that every print has a "spotting" or "orange...

Sadly.. I've been a faithful Roland User for 8 years and for the last year I feel they have been brushing a major problem off. If there is anyone else having these issues.. please post. I need to post this here because after months ( Over 8 ) of trying to work with them for a fix.. I have...