Recent content by H&H Group

Where do you buy your cardboard? We are looking at doing some a large run of cardboard but our substrate vendors don't offer cardboard. We are getting some from ULine but it is only white on one side and it is always very warped. Thanks

Gino, I just sent you a private message.

Thanks for the link. That is VERY pricey but since I can order by the yard and I only need a couple yards so I can make it work.

Hello, I have a customer that wants some cut vinyl graphics in florentine silver which they picked out of Avery's sample book. I since found out that Avery discontinued this silver last year! I also check Rtape and they do not make silver either. Does anybody have any of this they are willing...

Do you have any issues with the rollup film? We have been using a similar film from DAF and we are having issues with the heat causing "creases" along the banners. When we lower the heat, the ink will scuff or smear. Out of curiosity, what temp, passes, and ink saturation is your profile? We...

Hello, I'm looking for some advice/experiences from anyone who has experience with putting cut vinyl onto a wooden sign for outdoor use. We have a 6' x 4' piece of cedar that the customer wants cut vinyl lettering/logos on. Our plan is to use Thompson clear water sealer to seal the entire...

Looks fantastic. May I ask how you went about doing the seams?

Ahh, that makes perfect sense. Kudos!

Has anyone ever tried using white spray paint on top of a reverse print on clear vinyl to create the white point? I ask because we want to contour cut lettering and logo that are reverse printed on clear but I can't figure out how to do it with white laminate. Once you laminate, you have no...

Ok, does it matter what color adhesive it is? (Gray vs. Clear, etc.)

What white lam do people recommend?

Ultima Pro We have had tremendous success on our latex 260 with UltraFlex Ultima Pro 13 oz. banner. So much so that we have made this our house stock for indoor and short-term outdoor banners.

We found dibond to work best with ink adhesion. Also, we stopped messing with adhesion promoters as they are messy, toxic, and don't leave a clean smooth surface (from what I've found). Our solution is to use clear shield liquid lam after we print jobs for long term/outdoor to make the entire...

We have had lots of success with 3M IJ40-C for full and partial wall graphics. Always laminate for easier installation. I have yet to try Photo Tex but have heard lots of good things as well.

Thanks for the response. I will monitor it over the coming weeks to see if it starts to go away. I've read through many of the perf/lam threads and haven't seen much info on this problem from the people that are using OC lam.