Search results

Ooops SC

I have messaged you I think your temperatures are too high. SC

If it head strikes on canvas it is the worst type of material for the head to touch as it is like sand paper! I am using Oracal 3165, Arlon, 3m IJ180 and banner material. The only time I have it high settings is when printing banner. I would also check the humidity of the print area as the...

Avoid at all costs if possible head strikes as they can destroy heads. Also if the material is vulnerable to buckling this is usually an issue with the heater settings or very cheap material. The fuzziness around the edges will either be caused by fluff or could be nozzle deflections caused by...

+1 for Digiprint Changed my rollers out as the rubber/silicone had expanded and was rubbing leaving bits of rubber on the print. SC

Also check the disk is not warped. As the jumping/thudding can be the disk touching the sensor eye. I know their was an encoder spacer update on the 1604s but I don't know if it was an issue on the 1204. SC

The machine was originally bought from somewhere out in the north east. Is this guy a Mimaki technician or is someone genuinely able to repair our point what is wrong on the board? I have had issues with so called technicians before who just swapped out parts in a machine until it started...

All cables are new OEM, new dampers and cap tops. Cables are definitely are correctly positioned. How do I test the slider board, and then how do I repair it, as in the UK their is no one who does this sort of repair. I am very apt at repairing circuitry so this is not an issue. But I need to...

Anyone help on this issue? Thanks SC

Use them for all our machine parts here in the UK. Although they are Belgium can't fault them and really fast delivery. SC

Well I have spent the best part of this weekend trying to get the old JV3-160S running again. I have just managed to get 3 good heads into the machine, one I have just bought and the other two I had which had been flushed and stored away. I decided to install the two previous heads alongside...

Yes 3 heads CMYKlclm Slower but less to align. SC

+2 for Digiprint Supplies. SC

Maybe worth fitting a new print head cable. I try and eliminate all the cheap fixes first. SC

You cannot set the machine to run CMYK you have to set it in the rip. SC

We are using a very very old Xpres (UK) machine which must be 30 years old. We have had four new machines of various makes and supposedly quality and none of them come up to the build quality of this old monster. It takes two people to lift this thing!!! The only thing is I think spare parts are...

The air lock could be a faulty or empty damper. Does the yellow dampers have similair amount of ink as all the other colours? if not pull ink through the damper till it is about half full. I didn't think you could physically empty a JV33 of a colour due to it having sub tanks (I could be wrong) SC

Thanks everyone. SC

I purchased mine from Digiprint Supplies in Belgium they cost £25.56 for 10off plus delivery. I ordered 3 sets for our VJ1604. SC

I was going to run this as a 1xCMYK omitting the light cyan and light magenta. SC