Search results

Also looking at the orange and the light green you will always struggle with these colours unless you are printing high resolution. SC

What does the nozzle check look like? If their are any nozzles out you will get this issue. Also that looks a very low resolution you are printing with. SC

I don't know if this is the same issue you are having but all our work saves to a shared server. Sometimes if the server or work station has rebooted due to upgrades or maintenance signlab will save to a default location. Also make sure where signlab is saving to is the same place it opening...

I know APA do one... My opinion is it looks horrific. Mind you I don't love carbon fibre on anything. SC

That looks like a material issue. What is the material you are printing onto. Check your heater settings also. SC

If you are running bulk inks try this:- Install new cards. Set a print off. Remove cards whilst it is printing and install some old ones (I don't think you have to but I do). The ink will show as depleting but is not writing to your card. When it has run down to 20% switch machine off and...

How do I reset the Laminate Tension, Print Tension, Roller Pressure? There are only two speeds and it causes issues on both! SC

Scott I don't understand what you are saying. But when the rollers are down with no pressure their seems to be a gap either side. The big issue is I have checked the flatness with an engineers straight edge and they are perfectly flat. I cannot figure why these gaps are appearing and when you...

We have an old Bunny 1400 Laminator (Economy Unheated Model) It says it was manufactured in France but looks like a Chinese model. Over the last few months I have had some serious issues with it. When laminating it either doesn't laminate in the middle of the print or if you tighten it down it...

You sound unlucky and by the sounds of it the head is faulty. SC

We are using 3Ms ij180cv3 here. I have tried Arlon 6000XRP but the savings in material soon gave way to the fact that it took almost double the time to fit! Also we had some issues with the Arlon de-laminating. Honest try them both but you will not believe how much easier 3Ms ij180cv3 especially...

When the head was replaced was a new head cable fitted? If not I would probably suspect the cable but print heads can throw some dangerous errors. The big issue is that if their is a fault with the head it could damage the main board. Maybe a good idea to get a new head, flush the old one and...

I would be changing the head also if I was you. How old is the head? SC

Head Cable and possibly Print head. Ink contaminates the cable and circuitry of the head and causes shorts. SC

Our Valuejet did exactly the same as yours about 2 years ago. Changed F2 fuse replaced print head and printhead cable (use an original Mutoh cable) and has ran sweet ever since. It is probably shutting down as it can sense their is something else wrong. Remember fuses are there as a protection...

As I am in the UK I used Digiprint supplies who are in Belgium. But if you look on their website they do have a supplier in the US http://www.digiprint-supplies.com SC

See my previous thread:- http://www.signs101.com/forums/showthread.php?59169-VJ1604-E071-error-code The fix is fit a new encoder disk and their is an update for a white plastic insert that fits into the shaft that holds the encoder disc assembly. This plastic insert keeps the disc central to...

Surely it is some sort of standard ethernet socket? It is definitlety a faulty part in the socket and their is nothing wrong with the board. I can't believe you would have to replace the main board for a simple component and one that wears out so easily! It's like having to change your car...

I understand it is on the board as I have had it out to replace the F2 fuse before. Do you know what Ethernet socket needs to be used and where can I buy one? Thanks SC

I guess I am asking..... Has anyone ever replaced the Ethernet port on a Valuejet? If so what and where do I buy? SC