Search results

Not a lot of experience with that material and feedback on installed jobs. We use other material for low tac that has air egress. We have used similar from GF with mixed results as far as shrinkage. I personally think 6mil is more stable overall but I could be wrong. Their print media is hit...

It said 3.75% rate for small businesses....2.75 for non profits.

Welcome Back!

We just did a bunch of sets of this for a couple clients....Happy 16th birthday...>Thank you first responders...etc etc. We or other MMs can do that work for you.

We can do those for sure! Shoot me an email. MM here

Try using a spot color. It Might...this is how Caldera handles spot colors fyi...take it to Lab and process it that way. We with caldera have the ability to program CMYK values for a spot color. When converting to CMY...grays go haywire.

We can do them no issue....but there are a couple different ways to make them.

As long as you have a UL rated product for the lam or the one step substrate...you are fine.

At least you know the funds are on the way and you are good to go with that.!

If the smaller bank gets you the docs to sign for disbursement.....I wouldn't worry about it. Tell the larger bank the truth you approved elsewhere.

I dont know the particulars on the Vuteks much anymore....I know our Agfa reads 36 & 40 respectively. Are you hearing the pumps running constantly? Or is it quiet and just pouring out? Quiet and pouring leads me to believe you have an air leak in the vacuum side and nothing holding the ink bank.

Carpet would be Walk and Wall or similar. With a caveat....it CAN roll up at the edges or puncture.

Sounds like the Vacuum venturi took a dump. No vac holding the ink back.

I have a Ryobi from Home Depot....pretty inexpensive actually. You can mount it on a camera tripod and put it in the room or where ever you want to. Also has vacuum suction on the back of it in case you're in a tight spot and cannot use the tripod or a table. Sucks down to a wall or door...

GF matched set or 3m IJ4 with 3645 depending on the budget for indoor or Walk & Wall and Alumagraphics Grip for outside. Walk and wall can be used for indoors but be careful with it on certain floors.

Thats good news for you. We went thru our bank...a smaller local bank and got funded last go around very quickly. If you got closing docs...youre in good shape!

What size do you need? We can print image/white/image up to 98 inch media or on PSA. We print 230% on 126 inch backlit flex. No problem. Email us..we're open!

Due date??? We don't use quickbooks for quotes...unless someone asks for quotes on letterhead. We have a spreadsheet that allows us greater flexibility and the ability to program it and change things as well as the look of it. IE using the same database as a job tracking board on a large...

If its hemmed and grommeted....fender washers, it can probably be used again if screwed into the existing plastic face. Shouldn't be an issue. Re-use...is a relative term as well. Sure its going to get hit by elements and all.

lol...we dont router them. We have a Colex 5x10 table with knife blades and all. Just did a bunch of lettering supporting Docs and Nurses and such for a client.