Search results

I called Oracal headquarters located in Georgia looking for 751 Middle Blue. They did not have the size roll I wanted but they were able to tell me what sizes they did have in stock of that particular color. Then I placed my order with Grimco and got it within a few days.

I've learned a couple of lessons the hard way - 1. Have some limit on how many trips to the site are included in your installation price. We are doing a job now that has caused us many additional trips due to either the walls are not painted or the inspector shows up sooner than expected. 2. If...

I ordered a roll of middle blue vinyl 751 Oracal in November from Grimco. Been getting the runaround. TubeLite can't guarantee when I'll have it either. They are saying Oracal is unresponsive to their inquiries. I prefer the Oracal 751 over 7125 3M or HP Avery since it weeds really quickly...

I have to install a rear window perforated film on an SUV that has a windshield wiper near the bottom center. Should I cut and patch around the wiper housing or try to remove it for installing the film, then put it back on the glass. Thanks.

Funny video - I can relate - my church uses Papyrus for their Church name. I have practically begged them to update it! But, they don't seem to get it.

48" wide by 12' high large stripe with thinner stripe inside and 5 large letters stacked vertically; yes I have good hand painting skills; using acrylic latex paint with fitches, rollers, cutters; new apartment building. Thanks.

I have been asked to paint some letters and graphics on an interior concrete wall. The surface is bare, unpainted concrete. It appears in a photo to look very smooth. The graphic has a stripe in it which I am assuming will have to be freehand painted since tape will not stick tightly to...

www.sign-engineer.com

Disappointing to see name calling when someone is asking for help.

We get yearly visits from the local fire marshal. They are very strict about what kind of paints you can spray if you do not have a spray booth that complies with the fire code requirements. For a small company like ours, this type of booth is cost prohibitive. We have experimented with...

A french cleat would work well for mounting. We make our own, just cut two pieces of 2x4 with mating angles. Add another 2x4 at the bottom for a spacer.

We are making a sign to go on an interior wall, size of sign approx 2'x3'. It will have LED lights to form a halo behind the sign panel. The lead wire will go through the wall up above the ceiling. Then it will connect (by an electrician) to the power from in the attic. Should we put a timer on...

I need to supply to my customer some decals to go on the body of a chemical/petroleum tank body. Need material to be resistant to chemicals. Just need one color lettering on a white background, small quantity. Who makes/sells these? Any merchants here make them?

We have two ShopBots. They work good and support is good also.

I use a 30" Graphtec for patterns. I can't trust it for anything longer than 6' at a time because it goes off track. Partially it is the fault of the roll of paper, since it often has creases that throws things off. I'm not crazy about the constant pounding of the pounce pin on the machine or...

Curious to know why the paint is sticking to the vinyl graphic and separating from the drywall. Usually if there is a problem it is because the graphic will not stick to the wall paint due to uncured paint or low VOC paint.

I am an old time sign painter and still have my brushes but rarely use them. There is not much of a demand for hand painted signs in my area. We do a fair amount of dimensional work that requires hand painting, so it's good to be able to know how to handle a paint brush.

If it's just a temporary sign I would make two single sided signs with 4x4 wood posts sandwiched in between. The time you spend making a frame for a double sided corroplast sign will exceed the cost of making two separate signs when you figure the cost of labor to build a frame and the wood cost...

Scuff surface lightly with scotch brite type pad; clean; roll or spray latex acrylic house paint or DTM (direct to metal) paint. Been doing this for over 10 years and it works well.

Thanks for the reply. Any tips on drilling into 1/4" thick Corten - bit type? I know it will take longer than drilling into other substrates and will probably go through several bits. I'm going to add an upcharge to this quote for sure as we originally quoted installing letters to tile with...