Search results

In terms of durability compared to 3m IJ180CV3 both with their approate over-lam how would you rate it? Anyone else have any thought on this? I have got find a good solution for this because these 60" signs come up pretty often. What do others think or have found out about long term Polymeric...

They don't make things easy to find. Do you remember what the product code was?

Who is your supplier for Hexis?

Anything new out there on 61" to 63" Cast Vinyl? Just talked to Gans and they no longer sell their 64" Cast. Another sign here 60" with bleed. Going to have to tell them we have to make it 59" Still don't understand the why the limit at 60"

You obviously haven't paid off the right people.

If I remember correctly that sensor is to the right of the printheads. SE Code: 21.02:10 - Problem with the Web Wipe motor Problem Description: Web Wipe Motor servo shut down. Corrective Action: • Switch the Power OFF from the back of the Printer, manually pull the Printhead Maintenance...

While the MC is out power down and clean the sensor that is under the printhead carriage. And also make sure the little area on the MC that is supposed to be white is. If it has ink on it cut a small piece of vinyl and cover up the ink.

That is probably the easiest way to do if your just doing one print or two, rewind it flip around and line up your mark where you started side 1. Other wise you have set 2-sided on the printer, roll it on the take-up roll with side 1 inside and then move the take-up roll to the feed roll holder...

I wonder why that would be so difficult. Works great on the 360. But I never bothered use any controls from the RIP just rotated the second side if need be. Please explain your procedure in detail. Maybe your missing something. Check this video out. It is for ONYX but might be helpful even if...

If graininess is not a problem then use CMYK mode. Don't know if the HP internal profile GCR generation is any different in that mode. But, If you have Onyx use the HP onboard spectro to bring in your measurements then you can set a high GCR when generating the profile.

It is not onyx that is creating 0 black. It is the profile. You just said "the profile created by HP". Why blame onyx? Does the HP profile engine really set their GCR that low. What are they afraid of? Trying to hide their grainy black? Once again DO NOT CLONE MEDIA PRESETS! You are probably...

There is software to edit Profiles. But there is no way to "reduce purple" without affecting all the other colors. It can be a bottomless pit, edit to alter one color and see how it effect other colors and then edit that effected color and so on and so on. Best to get it right to begin with by...

Absolutely, that is the best way to do it. DO NOT CLONE, start from the top menu when creating a new Media Preset. Not sure which printer you are using but there were firmware updates that invalidated all existing calibrations. So you have no why of knowing what firmware the existing...

And neither will a toner based printer.

CMYKLcLm has nothing to do with increasing gamut in fact one could argue that it decreases gamut. Like you I keep an eye on the Epson but fade resistance issue seem to crop up with them.

And your knowledge and what you are willing to learn.

"DISPA® delivers everything you would expect from a sign and display board – flat, smooth surface, excellent printability, rigidity and stability – and a unique design made of 100% paper and so DISPA® is fully recyclable." 100% paper and it doesn't warp????

Have you used ColorGate?

Question for you Sharaz RIP user. Does it have a replace color function?

One of your curing modules has gone bad. It will need to be replaced. You have 4 of them and they can be check in service mode to see which ones are bad. Of course you can tell by where the ink is not curing.