Search results

Can you bypass the auto cleaning settings on a mutoh 1324? Sometimes I’ll get a wiper sensor error and the cleaning will almost be done then the machine keeps trying to go through a cleaning multiple times before it lets me print again. (I know I need to replace the maintenance station to fix...

I get often an end of roll error and the machine stops printing with banner material. I'm pretty sure it is the heavy roll and not my sensor as I never get the end of roll error with vinyl. Does anyone else get this and have you found a way to bypass it? Also, I'm finding it harder to get 100ft...

Thanks! yes I figured it out hold the up and down key together at the first screen. Vicki

I would love this contact information as well, I have two VJ1324s and have 12 cartridges that are on average half full that the chips won't read. Also, would be interested in the bulk ink options.

I have a graphtect fC7000-75 that is a workhorse! I have had this problem twice and can't remember how to fix it. When I start up the machine and select roll1 to get the machine registered to the front right to start cutting it goes to the back of my roll and stops on the left side. I feel like...

My mutoh 1324 was getting an E074er current and stopping in the same place on the left end of the machine randomly. Cleaned the encoder strip and checked everything was tight and not loose. When looking at the pully on the right side the pin and pulley popped out loosing the pin. (I've looked...

I needed a new blade holder, the blade wasn't moving freely in the holder to get a clean cut.

Looking at reducing our office hours/store front. We have always had 8-12 1-5 Monday - Friday office hours. With everything changing to more online/email we don't get very many walk ins, and the walk ins we get are usually not our good customers and take up time that don't amount to sales. Just...

Just recently I have been getting a really rough cut on my Value Cut plotter, I have replaced the cut strip and the blade and the problem hasn't changed. Any problem solving would be appreciated, I read another post that the blade holder may need replaced but then they but lubricant in the hold...

I just got a 2nd VJ1324x printer to keep up with printing demands. Trying to connect it using the default IP address. But files keep printing on old printer? I don't understand IP addresses very well and don't want to mess anything up. thanks SignGal

I have a sign project that the local city council, county commissioners and numerous other committees didn't want just a laminated printed graphics on aluminum in a metal frame. So they asked for a clear Lexan sheet on top of the aluminum panel with graphics. Here is my question, would your...

Signgal

definitely clear silicone. Way thicker than edge sealer.

Thanks that is what we were thinking should be done. Another question, I have a bus we are wrapping that has caulk lines in quite a few spots the the vinyl won't adhere to, would you just wrap over the caulk line and have the adhesion on either side, or cut it out leaving a think white line in...

We have seen on a couple of wraps done by other companies in our town where a cut line around an edge of a window or seam in vehicle (mostly buses and trailers) the company has ran a clear caulk line. Is this common on large wraps?

I was using 40 for all my exterior jobs and now 2-3 years down the road it is not holding up good at all, I've never used 35 for exterior or long term applications.

Waiting for a new cutting mat teflon to get here, any advise as to what I could use in the mean time to get my plotter working? Have you ever put vinyl/laminate or tape on the strip to help for the short-term? Vicki

Any tips on pricing a 40ft x 12ft brick wall wrap? I figure with the 3M envision film and laminate I'll have about $1500 in film and ink.

After 3 technicians told me that my y motor was probably out and they don't make them any more for the 7000 I was about to order a new machine. I got another tech from Graphtec walk me through a thorough problem shooting, after adjusting my blade and getting my setting reset after a factory...

I keep getting a y position alarm about 50-70% trough a cut job, any advice? Vicki