Search results

I use the seal-it pens for sealing the edges of chrome pinstriping and that's about it. John

Not sure about the edge detection problem. I print on a Roland SP300V and it came with media clamps that hold down the edges of the media as it passes by the heads. There are long and short versions and I usually use the long ones when printing clear focus perf. Another tip is to allow extra...

I've been a professional 3M window tint installer for over 16 years. If you haven't learned to heat shink film before you will never get the back glass right. I wouldn't recommend doing this without some schooling and lots of practice. Even some side glass will give a novice fits. John

I still think you may have the contamination like jhill states. As my inks get lower and are unequal I get the contamination from suction into the other damper. I usually can use the cleaning button on the printer to get my colors back. If the damper gets contaminated you almost have to flush it...

Here are some of my settings: In Queue a/b settings: preset: pre-press U.S. properties tab target profiles: RGB= adobeRGB1998.icc CMYK=USWebCoatedSWOP.icc matching method: Raster=colorimetric Vector=colorimetric check in box use embedded icc profile If you need anything else let me know John

www.digitaldesignware.com John

Interesting Problem. Hope you get it figured out. I print all my black using Roland color BK21A. John

I have the same machine you do. As I stated before, I have used GCVP and PCV2 profiles in versaworks for all my printing. I've printed on mostly oracal vinyls,3M and Avery wall vinyl, all using the same profiles. Never had any color problems. Most if any of my problems came from cross...

+1 demonic possession. John

LOL...I needed a good laugh today. :thankyou:

I received that error and had to set my pinch rollers in alittle to get it to register. I then replaced the cut carriage cable and it fixed my problems. Do you hear a "slapping" noise as the printer makes it's passes? If so, it's generally a weak cut carriage cable causing ther problem. John

Have you done a test print to see how your heads are firing? I use versaworks for all my printing and use the profiles, GCVP for calendered vinyl or PCV2 for cast vinyl. John

I've been professionally tinting with 3M products for over 16 years. It's not something your going to learn over night and have it turn out "like it should". Unless you are real lucky. Sub it out to a professional if you are looking for professional results. John

I print on almost everything with the GCVP or PCV2 with my SP300V. If you haven't tried those I'd suggest them. John

17 years using Flexi. No major problems. I guess I'm one of the lucky ones. John

That logo is on bestbrandsoftheworld website. You could do a test print off that file and see if the colors are to your liking. John

I got mine used cheap. It works for me. It isn't the best but if your on a budget you can make it work. You just got to know what you are doing, hehe. John

I have a 36" daige and have absolutely no trouble laminating. The one thing I noticed right away is you cannot use alot of pressure on the rollers. You will have a little noticeable "silvering" but it will go away, usually in a day or so. I set my rollers so they barely have any pressure on the...

You can buy a pci parallel port card for your computer for about $25 bucks!! Just saying....don't give up on er......lol. John

I had one for a few years. Served it's purpose for me on smaller decals. Need to keep the head area very clean when printing. I guess for $250 as a cutter you could do worse. John