Search results

Did anyone stop by and say, "You misspelled a word?"

It's on the piece of paper your DMV gives you when you license the boat. There has to be a space between TX and the numbers, and between the numbers and the last two letters. https://www.boat-ed.com/txb/tx_specific_images/graphics/tx_validation_decal.jpg...

There's a reason you haven't been able to find the pattern. The manufacturer doesn't allow it.

That is correct, and if you price check multiple dealers you'll find Epson inks are the same price everywhere.

The color bars you are referring to are not for the purpose of seeing print head deflection/dropout. They are used in the offset printing world to show the spot and/or process colors used on the print. A solid bar of Cyan, magenta, yellow, or black will show defects if the printer has bad...

They have to use an aluminum primer (self etching) first. Then any regular automotive paint will be fine, and you follow normal outgassing time (30 days is usually quoted). On the other hand, we used to roll on bulletin enamel and dry a day or two and then apply vinyl lettering, and it seemed to...

That font is available at marine supply stores in a large sheet of letters and numbers. Comes in different colors too. But when you install them be sure to put the required space between the sets of letters and numbers. TX 5215 AY, not TX5215AY.

https://signs101.com/threads/mutoh-1324-clogged-head.129469/ https://www.manualslib.com/manual/1022982/Mutoh-Valuevet-Vj-1324.html?page=226 Google can be your friend. If you're not Donald Trump running in 2020.

I've never used that model. Typically a head soak is done while running a cleaning. You stop the printer while the heads are off the capping station, fill the capping station with cleaning fluid, let it park the heads and shit it off for some period of time--an hour, few hours, overnight, etc...

yes

I'd try a head soak and cleaning. if no better, change damper.

Again, if you're just doing the pizza panel, translucent vinyl is the right way (it's just two colors). Even if you're doing all four panels it's the right way, with the exception of the bottom chicken one. And if you're going to print, the right way is to do a clear print with a laminated print...

Something with high tack adhesive meant for LSE (low surface energy) surface.

Not sure what you are talking about. Why would you want a head test pattern in the middle of a sign?

Don't know the name of it, but it's certainly ugly. The watercraft owner should take this opportunity to put something good looking on there.

X7 and X8 both work fine with Windows 10. X9 works okay (not a Windows 10 problem) but has numerous bugs.

You have to select which cutters to install while you are installing Onyx. If you don't select any, there will be none available in the dropdown box. Likely the person who "fixed" things reinstalled Onyx and didn't select any cutters. If you re-run the setup you can add them.

Good technicians clamp the vinyl to the table to be able to have both hands free to weed the vinyl.

The angle of the blade. I actually did laugh out loud at that. It might nbe interesting to hear her explanation of how that works.

The standard, since back when cutting vinyl first started was upper right to lower left, for the very reason you stated. If doing large numbers of decals, you'll find the occasional one that works better left to right because of the combination of letters and shapes.