Search results

Hello and good day all, we been having issues with our little VS-300 and going thru cap tops every month or 2. When we purchased this one used there was so much ink caked on the cap station mechanism we had to take it all apart to clean it properly. Its possible we didn't adjust it correctly...

Ok, we had this printing a so so grey finally and within the print half way it changes the grey to magenta :mad:. Did a test print and all nozzles firing perfect. This thing is never constant and has everything new in it including head, pump cap etc..Any ideas?

Thank you guys for all the info on this!!!

I've been printing since 2005 and only had Roland printers religiously and had quite a few different models. None have printed a decent grey and we tried everything in from profiles to pallets. Can anyone recommend a different brand solvent printer that will print a nice variety of grey that's...

We had the same issue and lowered the ambient temp of the room which fixed it for us.

Thank you rjs for the advise we will start doing that. I'm wondering, Is it possible this could be caused by the cap station unit being out of alignment to the head? also how much gap from the seal of the cap top to the head should there be when off the station. Thank you everyone for and advise.

Hello all, Still having an issue with this. Printer is a VS300, new head, captop, drain lines, and pump. Just swapped for another new captop and lines and still same. Now that I remember when I bought this it had the same issue even before I put all the new parts in and explains why the whole...

Thank you guys, it was a clogged drain line.not sure how that happened. thank you again for your insight and help

Thank you for the reply's, we just changed them when we did the head. Its a new cap top and lines. We just changed the pump as well with the HE brand from ebay but was doing this before the pump change.

Hello and good day to you all. Been having print quality issues ever since the new head replacement in the Roland VS300. Colors are off quite specially browns and tans, we get a smearing and do regular daily cleanings, and its seems like its dumping cyan to the point its puddling under the...

Worked like a Charm! Thank you ever so much again!!!!!!!!!!!!!

Thank you so much netsol and scott. Ordering now! I will post a final update when she's up and running. Again, seriously thank you!!

Thank you, so glad its not the ethernet from the printer because its part of the main board. Its weird that we ran version 4 with another roland VS for years. I went to the Roland page but they didn't have the version 5 and says needs to be purchased, but they did have the version 6 upgrade that...

Thank you netsol! that is very kind of you. you guys are amazing. We are grateful for everyone's help with this. We get a solid green on the port when we turn the machine on, the orange blinks for a short period of time then off. we will get a switch asap. C5 thank you. we took out all leading 0...

Thank you all again for the comments, We are running versaworks 4. I just checked the firmware on the machine is 4.40 The latest from what roland webstie states is 5.10. I just tried updating the firmware and states "can not locate printer" Any ideas? thanks again everyone

Thank you everyone for all the info. I'm grateful. We are running direct with a ethernet cable from printer to computer without a switch. For some reason the printer is showing mandatory 3 numbers per section. Thank you for the video, we tried that to the T. We also just downloaded the...

Hello friends, we picked up another used VS printer to do small jobs on but this one is not connecting to versaworks for some reason. I've done a few of these with no issue, this one not the case. Using windows 10. We tried different cables, set both ip addresses (printer 192.168.000.99...

Thank you for posting but they actually do. We order several things from them that are chinese copies like dampers, wipers, tubing, captops and a lot more. We were just curious on the head because it came differently then the others this time. Who knows, It could have been a return and the...

Thank you, This was listed from the site as a DX6 and that's what we went by. thank you for clarifying and always glad to hear your advise.

Thank you, I'm curious on the difference between the two? We have a few roland VS printers that we've used DX6 with in the past. Still haven't received a reply from digiprint and has been almost a month. I was hopping their lighting fast reply to this post was for customer service and not...