Search results

Your humidity is too low to expect quality printing. Most manufacturers recommend 40 to 60% RH. You'll get better results by slowing things down - more passes, unidirectional, etc, but RH that low will be difficult to overcome. Try to get that up with a humidifier if you can. Sent from...

Sensor errors will give you an error message. If you're not getting any error messages, then don't go turning off the sensors. Only a couple off things cause those symptoms. Bad our overheating power supply our bad or overheating main board. Open it up and clean all of the dust out with...

The FX only has Ethernet connection. More reliable and no (practical) length limits. Sent from my SM-G955U using Tapatalk

Marlene, thanks for the links. Toad, thanks for taking another thread down the toilet Sent from my SM-G955U using Tapatalk

Sounds like you need to clean the chrome bars that the carriage slides back and forth on. Clean with isopropyl alcohol then put a small drop of 3 in 1 oil on the bars. Good luck Sent from my SM-G955U using Tapatalk

In my experience, when the fuse blows, the heads will not fire at all. It looks like you may have broken the manifold when changing the dampers.

If your maintenance station is in good shape and the printer will be left plugged in and turned on, it should maintain itself just fine. You may have to run a few long cleanings when you get back. If the maintenance station is old, you might not be able to count on this plan though. Good luck.

- good advice for most print quality problems

Unless you have .PDF as a file type available in GA in the file open dialog, you won't be able to import this. Even if you do, the version of PDF most likely will be newer than GA can handle. It's been too long for me since GA I can't remember, but I think Open and Import use the same filters...

Have they cleared it with the dip switches on the main board? If that doesn't do it then most likely the main board will need to be replaced. Sent from my SM-G955U using Tapatalk

Have you tried cleaning the NovRAM? This basically resets the plotter too the original factory settings. There is a key press plus power on that will reset it. Don't do it with the dip switches one the main board our you'll have to recalibrate all your settings and this will likely rewrite a...

There's is no link. Read the post right above yours. Sent from my SM-G955U using Tapatalk

Jburns is right: Gerber really said they dont make parts for the GS15 Plus? They still sell that cutter. Somethings not quite right here. If you bought this used, Gerber probably won't help you unless you pay them for help. But they are obligated to support a product they sell for 5 years...

I've not used a Roland cutter with omega, but you probably need to install the usb Windows driver, them dry it up in the GQ manager, USB settings. Hit list, them select the installed USB devices and find the plotter in the list. And what I meant by print/ cut was using the GX plotter to cut...

You can probably cut to the Roland plotter with the generic HPGL 24" driver, but won't be able to do print and cut jobs with it. Sent from my SM-G955U using Tapatalk

It looks to me that head 1 needs to be reseated. Or that the carriage may have a problem. If this were an older printer, I would recommend that the bias adjustment needs to be done, but the VG doesn't have this adjustment. Also, on this material, the feed calibration is slightly high...

It's plasticizer migration. Essentially the oil in the banner is coming out through the bond that the paint made with the banner material. This may not be salvageable, but if you can get the paint off, it might work. Sent from my SM-G955U using Tapatalk

Also a picture of the nozzle test print would help. Your description that it's perfect is pretty subjective unless you know enough to not have to post this question. Sent from my SM-G955U using Tapatalk

I wonder if the matte laminate is old. Been sitting in some warehouse for too long since it doesn't get used as much? Sent from my SM-G955U using Tapatalk

I've seen all of those and it makes for a less valuable product Sent from my SM-G955U using Tapatalk