Search results

Technically, you don't buy the product outright, but rather the license to use the product - but I get what you're saying. Purchase the license to use this version of the product till forced to change for some reason - OS compatibility, client or vendor compatibility, etc. I also think it's...

Is your nozzle test missing any cyan? Could be a printer problem.

Don't discount "material" problems. They're probably more accurately a material/profile problem. But make him prove it by successfully running a similar Roland media with a Roland profile or a similar media from a major manufacturer before you accept that explanation Sent from my SM-G935V...

I use the coated version for gloss prints and the uncoated when printing on matte vinyl or banner - this gives a closer representation in my mind.

If you've otherwise got a good thing going with Beacon, try to work something out with them. I don't know what your volume is, but at the least, they should not be charging for their service visit. They should also cover the manufacturer's tech visit. If you can work out a media or ink...

Dutch, I work out of the Portland office. Did you check the resistance across the outside legs of the transistor? If it's different than the others it's bad. Just going from memory, I think they should be about 40 Ohms. If you want to get someone local to replace it, check around at a place...

I see the simple bi-directional test. Have you done the detailed bi-directional calibration? I think I would set your feed calibration at 25, but I don't think that's causing the banding. If your nozzle test isn't perfect, then you can't really expect perfect prints. Did you purchase this...

Lifting at the corners is Tangential Emulation. Go to screen 2 of 3 in the condition settings and turn it on there. To adjust the crop mark sensor - Go Menu>2-[ARMS] > Screen 3 of 4 > 1[SENSOR OFFSET ADJ.] The instructions on how to complete this should be in the user manual that is on the CD...

Papajo is correct. Flushing position adjustment is a critical adjustment on the VGs and SGs Sent from my SM-G935V using Tapatalk

Also newer versions of Flexi give you the option of selecting a GPGL driver. And, onyx now defaults to a GPGL driver. So, know what you're sending before making that change. Sent from my SM-G935V using Tapatalk

As I don't do wraps, I'll let others chime in on their favorite, but I know that some of the films are optimized for latex vs. solvent, so I wanted to get that cleared up for you. The IJ-180 series has been a gold standard for a long time. I think that the latest version has a micro comply...

What printer are you using?

If you've unplugged the carriage board and it is still blowing fuses, then your problem (at least one of them) is before the carriage board. It could be the trailing cables or the main board. Disconnect the trailing cables from the main board and see if it still blows the fuse. Inspect the...

>Google Translate> Hello, save as pdf or jpeg from pdf while waiting to solve the problem. good luck

You've been able to cut Edge prints from Omega for some time now using a Graphtec plotter. I think a Gerber 15" plotter would be better, but it is more expensive. When Graphtec was making Gerber's friction fed plotters, Gerber started to incorporate the Graphtec cutting marks into their system.

You may have to reinstall VersaWorks on your new drive in order to do that.

They do come with a take-up. Check with another dealer.

This one will at least give you Lab color values. And it is extremely portable. I'm not sure if your RIP software will allow you to create special color tables, but if you can and have decent profiles, this should get you pretty close (Color management can't be totally covered here, so I'll...

If you had to reinstall Windows, this is essentially no longer the same computer.

This still looks like encoder strip issues. Probably time for a new strip or new sensor.