Search results

installed new CAP TOPs ? or you have any change at the CAP TOPs ? At the captop is a air nipple....working follow....Cap top close the head.....sucks ink aso.....cap is close...the capping unit lower a little bit but the cap is close and the airvalve (nipple) opens and pump sucks the rest of...

Yes correct what AF write. If you buying used i1 let you send a Screenprint or saved file from i1-Diagnostic so you can see all live times aso.

We have a plug & print solution but this time in evaluation process. 2 Liter Bags incl. RFID Chips ~130-140,-€ for Arizona GT-Series and Acuity KO inks compatible round about 3-4 weeks check out, if the inks Mix and Match (Colorgarmut aso) after successful evaluating find in our eShop.

alternate and a little bit cheaper is the FB950 Serie.....if you dont need white option...

You can send the IO-Board for check and repair to us. 1st which INK you use ? OEM or 3rd Party.....often seen that 3rd party ink make same trouble.... 2nd Checkout all reservoirs if its not clogging the overflow lines "connector" 3rd the vaccum/pressure valves "real closing/working"

1st check out the Y-Calibration. use displayed calibration not manually ! 2nd missing Nozzle must be mapped ! 3rd Bi & X-Head then run BI again for final adjust ! 4th. Mediafeed adjust ! if all done you must become a very fine PQ. Please send me pictures from the PH Condition Nozzle Test...

POWER OFF input DOWN RIGHT LEFT UP RIGHT DOWN LEFT after HOLD LEFT DOWN RIGHT + POWER thats it..have fun

NAZDAR / Lyson available and the better choice than Bordeaux ! :rock-n-roll:

sorry ....not damper "reservoir/Subtank"

for the first check out if there correct wipping "can be drops under the heads" Another reason electronical demage the head. theres many thinks to check it...begin with the damper

thats the result for 02300022: 02300022 Media Feed Encoder Error No media belt or motor encoder ticks forward Current being applied to motor, but neither encoder isrecording motion. Check motor wiring. Check motor functioning. Check motor encoder and belt encoder.

first check it out to print without I2-Waeving. SIGN QUALITY AND 4PASS 2nd a monomeric Vinyl is always a critical Printing Media..... For Backlit use.....Best Quality and Print with Double Density. Mediafeed must be allignment for the Media. Not use I2-Waeving so you see it any time by...

i have many Inks tested....and the best solution find out with NAZDAR Series. always stable quality and perfect performance. Iam not a NAZDAR Distri but we use it for our Privat Label. Little bit expensive but for HighQuality Ink fo me Best Choice ever:rock-n-roll: 2nd. Fuji-Sericol Inks are...

My counsel first to change the OEM ink to a modern solvent ink like 517 NAZDAR

check out the Nazdar/Lyson 7300/7400/7450/7470 inks :rock-n-roll: for any special question email to: inkanswers@nazdar.com

ok you are sure thats in fakt the same cartridge as used one before. Iam very sure that SEIKO ink cartridge not usable at 9000s with SEIKO Chips inside !!! there another Code on Chip FAKT ! Nothing else......use a flashlight and show into the cardtridge slot if you can see all connection Pins...

Seiko branded Cartriges cant be used "chip code is different" so what to do........ insert the old Chip from HP Cartridge in the Seiko Cartridge and step to the maintenance menue and mark the Cartridge as none OEM and all works fine. But if you boot the machine new must every time mark the...

yes of course. you can find it at our eShop or send me a message with detailed data. br

same too.....3x HP 9000s, 1x Seiko 100s , 2x seiko 64s as spare part so all complete without Printheads.

everything shows the ebay seller vollteufel and your store same.. <--- are you under drugs/drunken or what else ???? Your write here iam vollteufel and our store same......:banghead: incredible ********...Iam not the Owner of this company.....so you can check our website and all data can be...