Search results

yes good call they material sometimes sticks and causes a big mess also when you print use high quality it will take longer but you get a better print on the static i have noticed on the standard print you get more banding

i get it from fellers also i use the solvex clear and white(least expensive and it works good) if it is and inside decal you print it backwards and then you may have to laminate white vinyl to it for opacity or if you silk screen you can flood the sheets either way just make sure not to cover...

yeah what they said i hava had the same problem

i will give that a shot fred thanks all

yes i did the cleaning and yeah i figured it was a pixel out but that means replace the print head correct

if the lamination and the vinyl are the same sizes i don't use the craft paper and it works good i have a different laminator but i had the same problem

my gerber edge ahs a line that runs through all my prints down the middle of the 15" width about .008"-.010" thick not much but enough to ruin your decals print head bad right? can i fix it or is it a tech job?

welcome and good luck rough time to be starting a new business up

do you have the cleaning fluid cartridges did you run them through thesystem maybe the clog was not in the print head or maybe some sort of sensor problem from the cartridge area just guessing here at things to check also did you try roland tech support good luck

crap! vegas you type faster than me

you make it make your cut line /stroke them open the swatches window and select new swatch double click and change the name to "CutContour" and change from rpocess to spot color and you are good to go (who did you get your printer from? they should have shown you this or is this a test, am...

we are going to the show in ac hunting for uv printers haven't narrowed it down yet but i know we want white ink capabilities i have heard a couple of stories as far as beds not being strong enough for the materials and the feeder going off track

we have 6ft x 8ft main table, laminator at the end and ez cut on the side also a 2..5ft x 16ft counter for our gerber edge both with shelves underneath could use another big table both are made from plywood and we glued formica(or something close) to the tops and sides working good so far...

we have been looking to do the uv thing for the past few years still can't spare that kind of money on the machine $90000 and up for the units we would need to get need white ink and maybe clear also the way thins are going now would want flat bed and roll to roll capability also have to...

you are right i may as well posted a hamburger picture might have been closer

is that nat deliman the logo for national deli hotdogs did some work for them and that looks like they are related uncle and nephew maybe

your right or my right?:doh:

if you didn't find it yet i think lexedge is just a gerber product which doesn't come 48" but if you just need a solvent pritable lexan or polycarbonate try ge polymer shapes or peidmont plastics they sell all kinds of sheeted plastics we use them for all our silk screen material and some...

not sure if this is it, just throwing ideas out but did you check all your cut lines to make sure there are no breaks any where in the artwork maybe the cut line has an open segment and part is not a cut line

we just get ours from sign supply usa i assume they are roland blades but either way we cut alot of vinyl and some floor graphics sp300 2 years old only changed blade two times vp540 1 .5 years old only changed one time