Search results

I'd like to quote OP from another thread yesterday.... "" 95% of computer and component problems......... ARE OPERATOR ERROR))))))))))))) "" Are the ColorCamms problematic? Well they do have a few quirks but I have found most of them can be overcome with minimal effort applied. I can show...

This will probably raise an eyebrow or two but on one system I've got 2 seperate sign programs (Inspire Pro & Flexi Pro) running off of one key and at another work station there are 2 computers both running Flexi Pro sharing one key via KVM switch & USB hub.

Pics & description ane not correct for what he claims to be selling, plus 1/2 price? I'd say it's quite possibly a scam. The printer in the pic resides here in the U.S. I'd recommend going to your local authorized Roland dealer, at 11K you can't go wrong. By the way the V series Versacamms...

By looking at those pics I'd have to agree with Rage, looks like your'e cut path in your file is whacked. My print/lam/cut process on my Versacamm is dead on every time.

First thing yesterday morning I boot up my main system and my cherished Viewsonic P220f dosen't come on, hooked it up to the RIP server computer and nothing, makes all it's usual little noises but no picture at all, I'm assuming that the main tube fried, is there any way to have a crt monitor...

Jim, these printers are no longer "SUPPORTED" by Roland, meaning that Roland does not offer technical support on them. Roland's main headquarters located in Irvine, CA will still service these printers as well as most authorized Roland service centers such as Cammtech (Jim at Cammtech, very...

Yes they are still serviced.

The way it was explained to me when version 8 came out is that if you were to upgrade previous version to 8 during the install of the upgrade you would be prompted to insert the old key, this would somehow disable the old key say in 20 hours of use, believe it or not a lot of folks that upgraded...

Meister it sounds as though you may not have the printer/cutter (Roland PC-60) set up properly in Flexi, this procedure installs the proper driver in Flexi for that peticular device and needs to be done before you can RIP and Print or Cut/Plot. If you want to run the PC-60 out of Flexi you...

Flexi Sign Pro is all you need to run that PC-60 efficently, it has the RIP (Production Manager) to perform all your print/cut/tile/etc options at one time. Not meant to be sarcastic but read the Flexi manual (help menu) it explains all features within program.

Flexi Sign Pro for RIP and Print

Got a request for paper prints, what paper have other Versacamm users had good results with? Any specific brands to stay away from? What sq ft price are you getting on posters? Thanks in advance for any input. :thumb:

duducj, put it this way: How much value is in taking a little time to better familiarize with your equipement to become more efficent overall. Well? Don't beat the guy up for asking a simple question. :cool: There's always more than one way to look at any situation, it dosen't...

Make sure that both pinch rollers are aligned with grit rollers, for 10" media you will need to move the right pinch roller to the left a couple inches to insure that the left pinch roller aligns to a grit roller, just look at this without media in place.

Wouldn't it have been quite a bit cheaper to have had it serviced at a Roland Service Center on the east coast (Cammtech) than shipping it all the way out here and back? http://www.cammtech.com/cammtech_roland_products.htm

PC-600 max media thickness for printing is 8 mil, do not attempt to print directly on magnetic material, simply print on vinly and apply the vinyl to the magnetic material.

Good googely moogely, where the heck is Almont, I think I'm movin my shop, $1,300 for a basic acrylic replacement face & $300 for a 5 minute install, hey don't get me wrong I love your pricing just wouldn't be able to get half that here, lately I've been loosing bids like these at $20 per sq ft...

With the Windows driver for the PC-600 you can print/cut directly from Illustrator or Corel without any need for CoCut or the RCC software, I found Flexi Pro to be the most efficent software to run the PC-600.

OneUpTenn, Click on your Help menu, then click on Help Topics, this is your User Manual, over 200 pages, very helpful to print it out & put in a binder and keep at computer stations.

This is easy as pie, there are actually two seperate Contour Cut features in Flexi, I would strongly suggest reading your user manual to acquire a full understanding of what there intended usages are, it sounds like you are using the one on the Effects menu when you should be using the one on...