Search results

On some of them it is all around. And in a couple days it will be all around the bolts and wave out from there a little bit. There is not much surface area between the bolt hole and edge of the sign. So this is the easiest place for the vinyl to start pulling up. There is most likely tension...

Most definetley over tightened. The painted aluminum surface might be causing it to not adhere as well. But they definetly over tightened. You also should always use a fabric washer between the metal washer and the vinyl. This will help the metal washer to spin on top instead of digging in...

$500 is not a waste of money in my opinion if you are a wrap installer. This would be an amazing tool. You set your target temp for the material not the gun.. Then the gun raises the temp until the surface material has reached that heat. It then lowers and maintains that heat on the surface...

Someone literally posted this just a couple days ago. Cool toy.

Thick laminate over the top of the old one will help a little bit but it's still going to make the blade wobble. It's like sticking new vinyl over the old ripped vinyl its going to be a little better but still going to be able to feel the cuts underneath. Make sure your blades aren't cutting...

Every once in awhile I get a wrong item or they missed an item from Grimco. I call our sales lady. We have direct phone numbers to. She does the computer work while I am on the phone and the next day they get the right stuff to me. If I call early enough it comes the same day. When there is...

Went though the buying process that is $34 for the current version and 6 months of support. But you can't charge your customers to use the service. If you would like to add it but also be able to charge your customers to use it, it will cost you $170.

Was unaware they made a lexedge outdoor. Thanks.

(Material/Cost+Markup) + Labor shop rate for time spent on prep of materials, prep of worksite, install, and cleanup, if it's long distance rate for travel to and from. Think about how long you think each panel will take to install. Multiply by number of panels and then give yourself some...

Depends on where the heat is coming from. Lexedge is not good for outdoor use. So if they are talking about sun heat then lexedge is not going to work. I would try to get a very clear understanding of the exact purpose of these stickers and why they need them a certain way. When someone...

I remember seeing on the forums somewhere about a guy who had taken gerber wires apart. He said that they used more wires in their connectors than normal. So possible that it might not be compatible. Maybe you would have luck with a standard cable then. If you have the machine the cables...

http://www.custompackagingandproducts.com/products/custom-printed-butcher-paper-sheets-rolls/ sorry

These guys. Never used them but saw some samples at a show one time. They looked good.

Send a very formal cease and desist letter. If you did the design and they did not buy the rights from you then you still own the artwork.

And to you as welll Gino. May your candy be good and none of that almond joy crap or trail mix.

But can the steeltrack cut a .080 aluminum sheet?

Does he have to box still that the printer came in. You can get very detailed instructions on how to ship the printer. Contact HP. It's going to involve packing it back into the box though. You would need all the foam and cardboard it came with. Biggest area for something to happen is you...

Yep put the wrong blade in the wrong holder and this is what you get.

What does the electrical from the machine to the main source look like. Breakers, surge protector. Just seeing if there might be bad power coming in. The thing that makes me think some other electrical component like the board is the fact it's just a certain circuit that is blowing.

Looks like flame with almost a transparent stainless steel lens. Don't forget the little motorcycle guy by the front wheel.