Search results

I'm sure it's not enough of a difference that will cause any issue for them on the water. However every time I set up any font, I never use the overall size, I base the sizing on the X-height of the letter, and let the customer know that the round letters will go above and below that. We've run...

I've been running the HP 335 Latex Print and cut bundle (separate cutter, I feel like that's a better setup anyway) for about 2 years now and have very few complaints with the hardware; those being that the spindle clamps are not the strongest, and the touchscreen buttons can be annoying when...

Flexi aligns to the first object selected. If you want to align multiple objects to one, just select the one that you want them aligned to first, then shift select all the others. Have you tried dragging in the other direction? Layer order does not matter.

I'm going to admit that I don't know what a UAC is here. Found the slider, and it was already set to the lowest setting, but it is still showing as "on"

Good idea. I just tried doing that this morning, and while I can create a folder, windows is giving me an error that the drive is "disconnected" even though it's not.

That's what I thought, however I can't seem to find the FSFonts folder anywhere. I see only CASFonts and URWFonts, no hidden folders, and the search function isn't returning any results.

Hey All, So we've updated to flexi 19 from 8.5 a few years ago, but when we switched I lost some of my fonts, specifically the monoline engraving fonts that I would make notes on my patterns with. The fonts from 8.5 that I want to install are STK files, and I can't seem to just install them...

Have you done an environment match since getting back? Probably won't do anything, but that was always the first thing I did when I had problems on my 540

We've been running a Camaster Cobra CR-510 for about 3 years now, and have a backup 5x10 Warthog CNC. Both machines are controlled by WinCNC ... :eek:. The Camaster support is top notch. We just had a ground go bad in the touch top sensor and their tech was able to stay on the line for hours...

I found this: https://homeguides.sfgate.com/restore-bronze-finish-45110.html and also this: https://www.impactsigns.com/how-to-refurbish-and-restore-a-bronze-memorial-plaque/ Good luck.

Sounds like you're talking about the encoder strip. Also, clean it with alcohol, not the solvent cleaner

Yeah my local butcher had a line out the door that wrapped around the strip mall they are in... I need to stop in there one day.

no, it's .085" all the way around, so a total of .17"

I do a .085" outline to set up my faces. I do rounded corners on them to make them a little easier to wrap.

I use the perfectear plus GXP775 with good results, and it's also one of the cheaper tapes which is nice.

to delete them you just select them and hit delete, or backspace, but to hide them there is the option under the "view" tab on the root menu under "show"

Call your local FAA office. My buddy works with aircraft and they can be super nit-picky. You definitely want to avoid any sensors, which there are probably plenty, and have to take into account the weight of the vinyl and laminate. If it adds so much weight, the plane may have to be...

Using 4500GLX, I'd be at $275 unlaminated, $325 laminated, and apply it for $100.

The sp540v has never been a good cutter in my opinion. We had to limit it to like 3' at a time. Clean everything, make sure the encoder strip isn't in need of replacing, do an environment match, and make the panels as small as possible.

check out http://ornamentalpost.com/