Search results

Here is what the book says

Here is what the book says

What part are you looking for? I think your number is wrong.

∗∗∗∗∗ ERROR 07 ∗∗∗∗∗ HEAD (----) An error was detected in the head connection. (Abnormal temperature was detected.) Turn off the main power, and turn it on a little later. If the error occurs again, carry out the followings. Refer to Electrical Troubleshooting ( See 7.2.3 ), and replace the...

Y current error. Does the head move freely from left to right when the power is off?

Contact Sinocolor get assistance from them. If you have never done this before it can be hard to do with out maintenance manual and training. https://www.sinocolordg.com/contact-us.html I do have ink for this printer if you get it running.

I suggest you don't do that. It should be done by someone who has done it before. The procedure is tricky. I think you need to deflate and do over night nozzle wash. A how to deflate video is here PLEASE use a deflate tool or make one of your own, I wrap medical tape around mine...

Bring print to left inspection area shine flash light ACROSS the print head. Clean around print head. If you see any hair remove it. Do the same thing at the capping station. Shine flash light ACROSS the cap, remove any foreign material and clean cap. Don't use q-tips use tech swabs. Place in...

Download and print your own Pantone chart. At the bottom of the chart write down your profile settings. Then compare that to you Pantone book. Then you can bring the chart into your art program and see what the CMYK values are and adjust you colors to match you Pantone book...

No it does not affect the dryer. If drying is an issue increase dry temperature.

Boards can be repaired by http://macmedia.com/ they are the best. I can get most parts for the older Rolands. www.digiprint-parts.com

We sell what we use. Everything on our site has been installed and running for a year or more. All Roland carts come ready to print, we call it plug and print. All colors match OEM colors. Are you near Ohio? www.digiprint-parts.com

This is leaping over dollars to save pennies. I suggest you properly dispose of the old cartridges and put fresh ink in you printer. A print head is 2K plus why chance it over 8 fresh new SS21 cartridges ( $552). I sell made in the USA ink for $69 a cartridge.

None that I've seen yet. I sell the VG carts for $69 Made in the USA.

There is a little micro switch in the back of the ink bay. It needs replaced, I agree with solvent inkjet replace both sensors they come wired together. Someone plugged a cartridge in upside down.

What do you need in service mode? Holding down the remote or enter key gets you into FW transmit.

When it was installed did the tech back up the parameters? I suggest you reload current Firm Ware and the parameters.If the motor doesn't fix this.

Can we see a test print (nozzle check).

Test print (nozzle check) please.

I agree it is not the encode. Did you go into service mode and do all the alignments? Bias, vertical and bi-directional's. What is your head height set to?