• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help Mimaki CJV 150-160 dripping arround the print

    Go to Walmart and purchase humility gauge about 10 bucks. Get humidity to 45-55%. Purchase an ultrasonic humidifier if humidity is not high enough.
  2. Need Help Mimaki CJV 150-160 dripping arround the print

    Could be static
  3. PLEASE HELP SYSTEM HALT (1) 1e4: PCB STA4-1

    You need a tech. SYSTEM HALT (*) 1e4 : PCB STA4-1 No Station IV PCB 1. Disconnect and connect the FFC located between the EPL3 main PCB(CN104/CN105) and the Station IV PCB(CN1). (Refer to 2.3.1) 2. Replace the Station IV PCB with a new one. (Refer to 6.4.2) 3. Replace the above FFC. 4. Replace...
  4. UJF 3042 HG dropped magenta suddenly, let's fix it!

    Did you do an Air Purge (or it's called deflate)? https://digiprint-parts.myshopify.com/pages/faq-about-mimaki-uv-printers
  5. Need Help JV33-160 Printing All Black

    Bring the printhead to the maintenance area on the left. Shine a flash light on it and see if black ink starts to leak or bead up on the printhead surface. If yes the black damper is stuck open.
  6. Suggestions Time to update, Latex or Solvent?

    Compare the two and pick the one that suits your preferences. Solvent I have never had to wear gloves to print or perform standard maintenance (Mutoh, Mimaki, Roland and Vanguard certified repairman). Solvent heads cost more per head, but over the life of a Latex Printer you replace heads every...
  7. Epson DX7 HELP!!!!!!

    Contact Alex, Alex at www.digiprinterparts.com info@digiprinterparts.com
  8. How to Print true CMYK ???

    Try this one
  9. Nazdar 2000 Inks Series for Roland

    Ink is OK to mix. Sold it for years, had issues with the chips and bung. Nazdar also makes 20/20 ink. I now sell STS ink. It is a better ink, free freight.
  10. Roland VP540 New Heads installed can't seem to get them aligned What is going on?

    You don't have ink in the magenta side of the head and are missing nozzles in the cyan and the yellow. Hire a tech.,. This is a 2 hour job for a good tech.
  11. Need Urgent Help (Roland SP300)

    no it is the heads. The main board is working or you would not get any ink jetting. It's the heads.
  12. Jv33 fuzzy quality

    what does the test draw look like? Is head level?
  13. Suggestions Solvent to Latex

    I would look at a UV printer. No head replacements, no electrician, no bigger AC unit to combat the heat (up side furnace runs less in the winter), no lamination requires other than wraps, no de-gas (solvent). UCJV300 if needed you can print white. Ink comes in liter bottles. Prints on more...
  14. Need Urgent Help (Roland SP300)

    You need new heads. replace heads, dampers, cap and pump. Start with pump first see if it gats any better. The magenta damper is bad (leaking).
  15. Streaks Around Design

    Replace encoder, reader or both are bad. That IS NOT head strike.
  16. Need help for some unknown tubes on JV33

    Both hoses are coming off the pump.
  17. Mimaki CJV30-130 Dripping Ink I need to resolve issue.

    Or like me but I am not in Minnesota. Later this week end I will have a video on my web site showing how to do this. If you are not confident you can do, it hire a tech.
  18. Mimaki CJV30-130 Dripping Ink I need to resolve issue.

    Replace dampers.
Top