Search results

standard base can be any starting point as long as you use the same point it is your standard. designing in the same color space that you print from. keeping your machine at the same color calibration. standard base is the base line where everything starts from. using this base line will keep...

i use standard icc profile. used across the board with all my design and print software. using that as a standard base i create all my own custom print profiles in onyx. exact color match is not a large priority in my job. repeating color form year to year is more important. so as long as i have...

did you pull the maintenance station out to clean the sensor. there is a Philips head screw on top holding the sensor in place. you can pull it and see if something is stuck to the bottom. could you of bumped the connection to the sensor?

that looks pretty straight forward. i would remove the logo, you will never get a good look by cutting around it. premask would be very important to keep it all straight and the pieces together. no need to wet apply something like this. the logo can be put back on with the original adhesive if...

its hard to tell from the picture, but it could be they was applied to a dirty surface or got way to warm

the ink wont cure with out heat, but it will turn to a powder and that really messes print heads up

depending on what model printer it is. i would look at a vacuum leak. or watch the cleaning cycle. are you turning off the printer at night or leaving it on. i now my hp 360 gets 8000 ml through a head before i normally start seeing any issues.

our seal laminator has had a few run ins with knife blades over the years. we will get a slight line in our jobs. these normally vanishes when you squeegee it on to something. we choose to live with it since its not a fatal flaw in anything. if its a line you can live with or that will disappear...

flying cars start production in 2025 2106 we are using teleports making cars a thing of the past.

i used to do a lot of web to print when i worked for a commercial printer. we had a web portal the customer could log into. they would be shown a template they could fill in the basic info and then submit the job. it would drop into my machines hot folder where i could then tell the machine to...

i would agree with your rollers being messed up. i would assume you can feel a line in your roller where your 30" material edge normally is. you could try to "fatten" up your roller by wrapping some 30" material to the center. this wont work. but you can try it. another thing you can try. empty...

I have a seal 54 and it has a safety sensor. its an electric eye to shut down the rollers if something to big like a finger heads into them. well my senor is acting up and needs replaced. i been looking online for a replacement senor with out any luck. i was hoping someone could help direct me...

with out being a lawyer its really hard to decide right or wqrong. thats what a judge is for. and they can go many ways with even a simple case. i know you can not reproduce someone elses branded logo. but a name can be similar and not violate the law. i know xerox sued xbox over their logo not...

i am in the boat that i really dont care if you diddle with your phone a little. getting your tasks completed on time and error free is way more important you can be a hard ass about everything and have a rule for anything. but whats your end goal. be supreme ruler or live life, have fun and...

they do add a moment of entertainment to the day. the memories are pricless

i would of told her. some look straight and others dont when the tires have the proper amount of air in them

yes i would trim it a little and seal the edge. you can use optically clear laminate strips to reseal the edge

did you move your blade holder to the front holder location?

yes it handles it like any print cut, just doing a perf instead of a straight cut

have you tried the 3 shells yet