Search results

http://files.mutoh.com/portal/ShareFileOpenFolder.aspx?t=Cb6Gys6oyjzNiPIhvIlAXy2TZK0vr01RPZpcV1dJOxPzJscFcuIoXbAYJIcITHHQ2iD67duPiznqdg0yn1RKwQ2&e=mark%40wireflyit.com Your welcome!

Did you look on their website, they have a relatively new portal to download manuals...

https://graphicdisplayusa.com/downloads/Dibond%20Fabrication%20Manual_May%202011.pdf

dibond and some of the other manufacturers have excellent guides for working with acm/acp, most house brands have slightly different skin thickness so you might have to make some samples. Also I believe there is a max metal HD with thicker aluminum that might help durability on bends.

I would venture to say this is going to take some dialing in. You are (from what I have seen on here) a very systematic person, so I would suggest treating the situation accordingly with a fact based approach. 1) Sit down and write out the process map as you see it happening in your head. 2) Put...

Like others said it totally depends on the project, size, etc. But in general you should be able to go to any engineering firm to have technical drawings made. If it is not huge or heavy or unusually complex then you likely do not need engineering for it anyways. From my experience most...

http://files.mutoh.com/portal/ShareFileOpenFolder.aspx?t=Cb6Gys6oyjzNiPIhvIlAXy2TZK0vr01RPZpcV1dJOxPzJscFcuIoXbAYJIcITHHQ2iD67duPiznqdg0yn1RKwQ2&e=mark%40wireflyit.com

Any recent changes or maintenance done on or near the print head? Hopefully its just a software thing that some resetting can resolve. Mutoh has the manuals on their webpage now I believe and that make be covered in some of the troubleshooting section but not sure.

I agree with the others and suggest a hard pass on this one. Whoever thought it was a good idea to turn a greenhouse into a wedding venue "as is" and then hire someone to make the structure do the exact opposite of its design and purpose isn't a logical person. They are also likely not going to...

Maybe some formed plastic lettering on a backer panel, along the same idea of what Gino mentioned. Keep it simple. For that size you might even be better off using a channel letter box instead of a cabinet. Cabinet is obviously a better option, but I bet a channel letter box would be really cheap.

My sample was just a print and contour of the Orafol logo, not particularly impressive in the quality department but not bad either. Pretty standard quality for a newer uv. Mine is not laminated, different texture between printed area and un-printed media. It does seem like a good option for...

I have always had the best luck calling in, its a pain, but usually wastes less time than emails and waiting for the useless generic replies. Direct contact seems to be best with them for an actual response. I have enjoyed the SDE so far, especially since they took off the limit on 1 vehicle...

Any info on what they recommended for you?

Not sure about the heads being different, but if you run that much print it should be a pretty easy choice to go with the 60600 IMO. unless between those jobs it is sitting unused for days at a time. What quality are you printing at for those production runs? Even at 720 6 pass i was impressed...

If you transfer as an eps they should keep their stroke width. You can always change the stroke on them in flexi, or expand before saving as mentioned.

Cordless hammers are such a great tool. We picked up a couple well used dewalt 36v with hepa filter at an auction for less that $50 a piece including 2 batteries and charger. They have saved a ton of time on a few jobs. If you have that many letters you will want 2 or 3 batteries ready (assuming...

We use a core as others have mentioned...

That is what everyone I have talked to has done. Without offering updated generic profiles I don't see how they expect people to upgrade. I haven't looked yet but I doubt any manufacturers (media or printer) have profiles available yet. We updated our design subscription to 19 but are leaving...

This was mentioned a by a few people in another thread, https://signs101.com/threads/anyone-update-to-19-yet.153571/ I would expect that it has something to do with the new 64 bit rip but I am not sure. I haven't heard from anyone who has discussed it with SAI, they are usually pretty good for...

At the workshop Mark had some of the not released features and they seam pretty good, he had not heard or seen anything on the sketch feature. It seams that they are repackaging some of their previous efforts in new ways. Last year they tried to re-launch signs.com and were having troubles, I...