I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hi all, ive had a massive virus sweep throught the network and the software installer for Ergosoft PosterPrint 12 Installer and manuals have vanished, ive been in touch with Ergosft who will not send me the files they want me to pay them a fortune to upgrade. could some nice person help out and...
hi everyone,
i have Onyx Rip Centre 11 and need the driver package for the 1204, for some reason that driver isnt on my master disk !
I had been using the 1604 for years but the 1604 broke down so now im on a 1204, can anyone send me this driver package ?
Onyx will not let me download anything...
Hi everyone, I've got a Roland Bn-20 and need to replace the heads,
when it comes to buying new ones I'm really confused by the model numbers.
one type of heads appear to work on all sorts of Roland machines.
The Roland part number 6701409010 works with
Roland BN-20 / XR-640 / VS-640 machines...
Can someone help ?
Ive had some problems with my mimaki JV 160SP and its costing me a kings ransom, so i want to move it down to using just 2 heads as i dont need speed. This will reduce my costs for replacement heads, dampers, pumps, capping tops etc.. etc.. etc..
Ive read on here that i can...
need a half decent set of 4 heads for a jv3.
my heads have dried out totally
its either that or ive got a fully working machine going for breakage...
either way.. if anyones interested or can help ?
thanks
Chris
Anyone know which tygon tubing they use for solvent pumps in mimaki, roland, mutoh etc ??
Ive bought the wrong type for the capping station and it just expands
and falls off the capping station.
I have a two new pumps which have tygone tubing which are perfect, but it doesnt show the product...
Help !
Can anyone help with a pump diagram showing which pipes go to capping station etc ?
My pumps been off the machine for a while so don't know the flow.
Mines a mimaki jv3
Firstly, someone deleted my thread ! :banghead:
And active thread that i was awaiting an answer on.
I was asking if the IO board on the JV 160SP may have been the key to my constant ink cartridge errors.
My mimaki never reads the chips, no matter what type of chip its presented with, i have...
hi all,
anyone know whats going on here ?
I updated the firmware to 7.3 and it rebooted with ERROR 04 FLASH ROM
with a long beep and the JV3 hangs.
Cant do a thing to get it out of this ?
Is this going to mean a new mainboard ??
Can someone tell me where the problem lies with my printer ?
Is this head alignment problems ?
I have a Mimaki JV3 160SP
And if it is head alignment problems, could some kind person guide me in the right direction to getting it back to working ?
Could some kind person please email me the ROM for v 1.4 or 2.1
or any version before 3.1 ? for the Mimaki JV3 160SP
Im up the creek without a paddle, as all my inks are a no show since upgrading the FW.
my email address is: ephedra@gmail.com
All the very best
Chris
PS: Thanks to Adam at...
Hi there does anyone have a better version of the firmware than 1.4 ?
I would like to update this myself, but in the Uk everything has to be done through a service centre !! Grrrrrr !
Weve had a Vutek PV200 for 3 years and its now getting very unreliable.
Weve been offered a trade in for a QS, but im inclined to go for a new Arizona.
And have advised our directors in the direction of the canon oce.
Anyone out there got any opinions or advice about this ?
Were really put...
Has anyone had any experience with this one ?
i have managed to bypass the date issues with RFID, but on one of the ink bags it says ive exceeded the maximum amount of picolitres in bag empty for one of the ink bags ?
Weve never had this one before, anyone else know anything about this one ?
Anyone know how to alter the bios settings on the Vutek PV200 bios ?
Ive tried booting with F10 pressed and it just comes up with a blue screen and a flashing prompt. just wondering how to change its date ?
Anyone have any ideas ?
Is there a way of bypassing the ink RFID's on the vutek PV200 ?
Ive heard you can trick the Vutek Bios dates to stop the expiry date problem from happening.
but ive heard also that this can stop the USB dongle working.
Any help on this ould be appreciated, as this is causing my company a lot of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.