change

Cheers guys, i need to swicht back from Eco Sol Max 3 (ESL5) to Eco Sol Max 2 (ESL4). Why? I am seller of MegaInk by Digital Ink Inks and buy broken printers and sell them again after refubish. Digital Inks can´t offer the ESL5 to me because of reasons i can´t tell here:) the machine was...

I removed this (question) post as I found the solution. Thank you.

Hello all, I come to you, again, for help. I have been fighting with our Mutoh for two weeks. Friday, Jan 31, It printed fine. The following Monday, Feb 3, it showed a lot of missing segments on the nozzle check. I alternated between cleaning cycles and nozzle checks until I decided that it was...

Greetings everyone, We decided to make the changeover from IJC256 to IJC257. The Application Bulletin here seems to indicate that we don't need to perform the "short flush," which is a process managed by the printer. Instead, my understanding is that it just needs to have a "manual...

I have a customer who rents out 5 pavilions for events. She wants to put a sign at each one that says RESERVED - then underneath have a place where she can put the day and time and the name of the person who reserved it. She needs to be able to change that part out herself. This is for...

We are looking for opinions on a few things. First off we are thinking about wrapping one or both of our shop trucks, to bring in some more wrap jobs. Currently both trucks are nearly identical (see photo 1). We are happy with the current layout and it has been working great for us for the...

Do you leave old jobs in your queue or deleate them when done? The reason I ask is I just printed some decals and used crop marks so I could laminate them after they dried. I had change the tile spacing between the decals to separate the a bit more. I had closed out VersaWorks and when I went...

Is there a way to change the cut contour mark size in onyx 12? I know in flexi it is set to 1 inch by 1 inch and .20 thick. Any place to modify this in onyx. Right now it pritns at like .5x.5 and i would like to make ti a little larger. Thanks

Called Mimaki but even they don't know, Really frustrated here... there is a thread here but it was no help. it's supposed to be real simple with the composition in rasterlink 6 but when ever I try to click and drag it and change the order that the cutting will go first it gives me a red line...

I need the software that allows you to change the software on a mutoh vj-1204. I want to be able to change the serial number to the vj-1304 to allow my printer to print the full 48" in bi drictional mode. I have a 1304 serial number but cant change the full serial number only the last part of...

I'm considering selling my Gerber Edge FX and Gerber GSX plus and getting a Versacamm VS-300i (30") instead. 99 percent of my decals are done on clear vinyl and are smaller than 9 inches long. I'm having a tough time getting good quality prints at such small dimensions, plus, the Edge just cant...

Please can anyone teach me step by step to replace the Cable Card or the "cut carriage board". i know how to change linear encoder and clean it. but this one is new from me. thank you in advance