cutter

We have a Kongsberg XL44 and need to add a new digital cutting machine due to our increase in jobs to cut. We are looking at a DYSS due to the price point and machine capabilities. Does anyone have good/negative experience with these machines and service. Are they reliable? We are looking at...

Has anyone ever replaced the mark sensor?? I recently did and almost have my machine cutting again, but i keep getting this "EO4010 ARMS, MARK SCAN ERROR, EXEED CUTTING AREA DURING +X DETECTION" I've cut a few other small print successfully, but this particular print is larger and printed...

My plotter came with the Blue blade holder and the CB09UB blade. I Often use the perf cut feature and have read it would be better to purchase the Red blade holder and some of the CB15UA blades and swap them out when i go to do the purf cut. Does anyone have any experience with the red over...

I was wondering how much printing can be done with the Roland Eco Sol e.g. BN-20 machines. Can they handle being run 8 hours a day or are they designed for light use only? Are the built-in cutters any good or shall I go with a stand alone cutter for decals etc.? If you have any examples of...

We have been long time, since 1996, Summa users. On our second cutter and have a DC4sx in house as well. For anyone who has owned one, you know what I mean when nothing else will do. The unfortunate thing for us it that we never had a tech/rep in house to show us all of the neat little tricks...

Could someone PM me an expected price range for the Summa flatbed cutter? Thanks!

Anyone have a used XY cutter they are looking to get rid of? I am looking for a unit if you are.

Does anyone know if you can take the stand off a Mimaki CG 160 FX cutter.

Summa D 140 vinyl cutter 54" Barely used, we never got the work we bought it for. approx 4 years old located just north of Boston, MA $3300

Hello I'm newbie here, I have a simple question. My cutter plotter have a two alternative port connection, usb-b and rs232 serial. Unfortunately usb-b port has damaged. So I would like to buy a rs232 cable to use it. Does it require a new driver for rs232 or just use already driver I have...

Summa DC4 for sale. We acquired it from another company sale and have no use for it. We were told it has very low usage. This is for the printer only. We were told there maybe some cartridges included but not %100 sure. There is no software but it can be ran from Flexi without issue. If you are...

Ok so i am looking for general information. Someone who might be using the same cutter and onyx postershop at least. the printer side of it is not as important at this moment.. I have 2 other threads open but this would be a more direct question for someone using the same setup. Thanks

Hey guys, I'm getting started with sign printing and am gravitating to the Epson S70670 due to the number of inks I can use (I'm a sucker for wide gamut). Unlike the Roland SOLJET which has a built in XY cutter, the Epson appears to not have the option. What are you guys doing to cut...

I currently have just a cutter and I am looking in to printer/cutters. This business is a side gig for me so looking for something economical and also realitively easy to maintain. with a printer cutter I will be producing t-shirt transfers, sign graphics and some small vehicle graphics which is...

I am not even sure how to describe what is going on. I am attaching pictures to show you what the vinyl should look like (Software screen shot) and what the vinyl cutter actually cut. So here is what I have tried so far to fix this: Called and worked with tech support from US cutter for an...

Hello, Does anyone use this program and what cutter do you use to go with it? Thanks, Bill

I just bought an 8-year old GX-24. It works fine after I've replaced the blade, blade holder and the cutting strip. I also took in all a apart and cleaned it as well as lubed all the gears, pinch rollers and both bearings. The issue I'm having is with the plotter making a grinding/squealing...

We purchased this cutter as an add-on upgrade to a 1624x we bought at the start of the year, thinking we would use as a backup and to do overflow work. Due to space limitations and being too busy this year, we never installed it and is still in the original box and crate and now we have decided...

I have a Colex Flatbed cutter. It isnt acting right. I have a cut file for the part that I am cutting, but when I go to cut it cuts lines that arent even on the cut file and cuts almost wherever it wants. Has anyone experianced this before or have any ideas? I am very new to this machine...

Trotec Speedy 100 C30 Laser Engraver/Cutter for sale. It is in tip top shape as it only has about an hour of use on it. Comes with trotec software, exhaust fan and some hose. Visit https://www.troteclaser.com/en-us/laser-machines/laser-engravers-speedy-series/ for full specs. $10k OBO. You can...