I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hi everyone,
I’m encountering an issue with a DX5 printhead, and I hope someone here can help.
I’m a service technician and have personally replaced over 100 printheads, so I’m familiar with the process. In this case, I’ve ensured that the new head ID was properly entered each time.
I...
Hello, I hope you are well.
I am writing this post because I have been having issues with my JV33-160 DX5 head for a few days now.
This machine had been sitting unused for about 8 years and we decided to repair it in July. We changed the head, the entire capping station, dampers, ink lines...
Hello, I hope you are well.
I am writing this post because I have been having issues with my JV33-160 DX5 head for a few days now.
This machine had been sitting unused for about 8 years and we decided to repair it in July. We changed the head, the entire capping station, dampers, ink lines...
Hi all!
I have a Grando 3202 DX5 wide format printer and due to change of hands we dont have the driver software for this unit deeming it useless otherwise. Grando will not help for some strange reason (even when offered to pay) and nor will the european supplier.... Shocking service!
Driver is...
Hello all! Was just wondering if anyone knows if it's possible to repair print heads? We have a print head (M007947) with a broken wall between one of the black and yellow channels. We've replaced it and I'm a little reluctant to just throw it away if a company somewhere in the world can repair...
Hi, So I have a quick question about the DX5 vs the DX6 epson printheads. Am I missing something or is the Max Resolution of the VS series 1440 x 720 dpi whereas something like the CJV30 can do 1440 x 1440 dpi
I thought that the DX6 printheads were a step up.
boa tarde, sou do brasil, portanto perdoem o meu inglês ruim.
Estou com problemas a cerca de 1 ano, minhas cabeças de impressão dx5 estão estragando a cada 3 meses, o que acontece é que a parte de baixo da cabeça descola, e fica vazando tinta pelas laterais, só utilizo tinta original mimaki...
Hi. I am looking to buy a used mimaki cjv30-160bs. We aranged on price with seller, but when i saw the nozzle check, i backed up a little. PRinter prints good but i can see some banding, seller tells me i can get that with feed media comp fixed, but when nozzle check was printed i can see some...
Hello friend, any can help me, i need buy a manifold for dx5 but must be for mutoh vj 1204, my head is new but i broke a needle of the manifold and buy new generic but is not the same.
all my parts i buy in the digiprint-supplies but now they don't have.
any can help me to find a store for buy...
hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...
So it looks like this guy is suggesting to flip the gasket inside of a DX5 printhead in order to get more life out of it. But as you can see in the image, this leaves a portion of the.... ink wells (?)... exposed. Also I don't understand how the head would still have suction from the pump...
I've basically abandoned my DX5 based Mimaki JV33 for some time. The DX5 head was super clogged, the test print was mangled all over the place. There's even a visible "scratch" across the head.
So I figure, what the heck, I'll pull the head off the machine and clean it real good.
Using a fresh...
Hi,
I have a Roland SC-500 printer and wanted to know what printhead type I have, for example, is it a DX2, DX3, DX4, etc. I'm getting mixed messages that it might be DX2 or DX3, but I need to know 100% for sure. My documentation does not tell me anything and I don't want to rip it out of the...
I am a new user with a cjv 30 -130 i tried to clean the print head(big mistake) from what i have been told is that i likly fired the main board. I have an opportunity to get it fix but im not sure what the fix would be. Some say its a capacitor but i have no idea.
Are there any companys that...
I'm looking to purchase a new print head and can save $300-$400 buying it on ebay but I'm worried it won't work properly. Has anyone purchased a print head on ebay?
Over the course of a couple months I started having banding issues and started having trouble printing red and started getting mixed ink dropping in puddles and splatters on the edges of the media. When preforming a nozzle check I'm missing a lot of nozzles on each channel except one. After the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.