eco solvent

Hello, I hope you are well. I am writing this post because I have been having issues with my JV33-160 DX5 head for a few days now. This machine had been sitting unused for about 8 years and we decided to repair it in July. We changed the head, the entire capping station, dampers, ink lines...

I've done what I feel like is a lot of research because I hate asking a question that is answered by a simple google search so hopefully I've learned enough where I'm not wasting anyone's time. Hopefully I don't ramble too much lol and hopefully this will help someone else because I had to do a...

HISTORY: We are replacing our Roland SP300v with a mimaki ucjv300 so that we can expand into a wider market. However, we do not want to loose the capability to do print and cut type t-shirts. We also from time to time may need to cut (none printable vinyl). I wouldn't want to put that in...

Hi all. Really appreciate anyone's help on this one! I need to find a stock with either a transparent, or a semi transparent, possibly glassine type carrier stock which is suitable for Eco Solvent ink, specifically the Epson S80600. Most carrier stocks that I can find which are for the vinyl...

After printing a large amount of motives with more than 90% yellow, we keep getting a problem with one or more of the yellow nozzles. They keep shooting out yellow ink on the complete width of the printer, and we get a yellow line throughout our whole printing. As I wanted to clean the head...

Hello, I'm from the UK. This printer has 8-colour ink cartridges. Providing I flush the system through would it be possible to use Eco Solvent Ink? Can anybody recommend where to buy if so? Especially for 8 colours? :) Thanks in advance!

Hi all, I am looking at replacing our existing Mimaki CJV300-130 that has been down with an error that the techs can't figure out without loads of parts and travel time (Our techs are appx 3.5 hour drive away). We are looking at replacements with wither another CJV with this supplier taking on...

Hello everyone, This is my first post on any forum, so please be patient with me. :) Some background: I am a small photo studio & print shop owner located in a small city in India. I also do sublimation printing (t-shirts, mug, etc.). Now, I want to expand my business and reach more customer...

I got a bunch of Jetbest ECO Pigment cartridges from a person who got rid of their Roland printer. Will this ink work in a Mimaki CJV30-100 printer if I change the chip? is the ink the same or will it ruin my printhead? Does someone have a reference number for the JetBest Eco Pigment? Any...

I am selling a Roland Soljet Pro4 XR-640 Eco-Solvent printer to make room for another piece of equipment. This machine has just been serviced by Graphic Solutions Group with all new heads, caps and dampers. No cosmetic damage. As new condition. Asking $14,600 OBO. The machine is located in...

Hi, We do decals and backlit signs. We have a Roland VG2-540, it prints great on 3M IJ180 vinyl. But the inks scratch easily and we have to wait 24 hours before cutting into bleed. I'm thinking of getting a UV roll to roll printer (probably Mimaki UCJV) to overcome these problems. But 1)...

Hi everyone! Newbie Here :) I'm currently working as a prototype technician at a floral business and am in need of advice in choosing print material. We have two large format printers in house, an 36" Roland UV printer and a new Epson S80600. I've been tasked with setting up the Epson and am...

Just starting out, I was curious as to whether there’s a trick to getting flexistarter to contour cut a print printed from maintop RIP software (Chinese printer) I can’t get fexi to read reg marks before the cut. Thanks!

So I'm wondering about the following: I am printing vinyl stickers and some may not be laminated. The question is: If while cleaning a boat with bleach, it gets splashed on the sticker not laminated, will the printing come off? Does the ink matter whether it's Latex or Eco-solvent ? Is one...

We have a 1624 here at the shop and the black subtank will not refill. I performed a valve check for the subtank and you can hear a click when this is done. All of the other tanks fill up just fine but the black is almost sucked up tight. Also, I have almost zero black steps on the nozzle check...

I'm trying to work my way into the printing business but I had no idea how much there was to know about it. I have a more than full time business now but it's quite physically demanding and on my next birthday I'll be hitting the big SIXTY mark. I thought the garment decorating business would...

Hello I have a Versacam SP540-V eco solvent (Triangle) I would like to venture into fabric banner printing. The fabric should be able to be tensioned as I want to make sleeves to fit over frames like a sock but be taut. Can anyone recommend a product?

Hello all! I am here in search of a substrate that I can wheat paste. Client wants fine quality prints on wheat paste media. I have found THIS media, it says compatible with PVA based adhesive, will it be compatible with the wheat paste process as well? If so, then this seems like a winner at...

Hi guys, I currently own a Mutoh eco-solvent printer and am hoping to purchase another printer in case my Mutoh ever has any issues. What 54" printer would you recommend for printing wallpaper on wall fabric? Currently I print on wall vinyl which takes a while to dry, and will scratch if I...

Hey All! I was just perusing a solvent vs latex thread and came across a great number of comments on eco-solvents being able to actually dry quickly. I'm curious, what all are you guys using? We use 20/20 Color, 440 ml for our Roland SolJet Pro III and SolJet Pro IIV, then Valuejet ultra eco...