• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

fuji

  1. Need Help Fuji Acuity Prime UV gives noticeably thicker black layers

    For context, we use a Fuji Acuity Prime 20 printer with UV inks on white ACB (CMYK only), together with PrintFactory RIP software. I have no formal education in printing, though I did follow a couple color calibration courses from our printer supplier. A problem we've had for a long time is...
  2. Need Help Caldera V14 Upgrade

    Caldera have a new version out, V14. We are still using V11 and while it's working ok (mostly, aside from the odd crash) they will no longer offer technical support. The upgrade to V14 is crazy expensive through our service agent so we are considering either sticking with V11 for as long as we...
  3. Oce Arizona Printhead Temperature over 200 celcius

    Technician came to level my printbed. We'd removed the magnetic table top and he spent the better part of a day tweaking the table and measuring with a dial indicator. I went to print the next day and had two adjacent nozzles out on black that cannot be cleared. Technician came and then found...
  4. Fuji Acuity LED 1600 II - LC no alignment

    On our one year old Fuji Acuity LED 1600 II is no alignment on the LightCyan on th x-axis. It comes slightly in about 3 Meters of prining, the misalignment is about .5 to .8 millimeters in all resolutions. We tried to fix this with #adjusments -> #printadjustment -> #SirDir At the testprint...
  5. Need Help Printing on glossy polyester 0.075mm thick

    Hey guys, I'm looking for some advice I'm having terrible trouble printing on a very thin glossy polyester 0.003 inches thick (Autostat CT3) I have a Fuji Acuity II 1600 UV Hybrid. There's a huge amount of static which along with the general thinness I'm assuming is causing the material to...
  6. Fuji Acuity Old Printheads

    Hello, Does anyone know of a way that you can clean old print heads after they've been replaced and the old ones have been sitting out for a bit? we got all new print heads and now the old ones have dried but id like to try and salvage them. Any suggestions ? or know of anyone who does this ...
  7. Matt print to gloss on foam board

    Hello friends, WE are printing foam board 4x8. Customer need glossy finish. We print using Fuji acuity. Is there any solution for making the print to Gloss finish. Please help ! URGENT ! Any spray lacquer ??/
  8. Perfect environment for fuji acuity ?

    Dear friends, I would like to know the ideal conditions for my flatbed printer. My clear ink when printed have a series of dots along with it...
  9. Mental agony with fuji acuity advance select

    We got a big job order to print yesterday. While printing acrylic. The black nozzle got blocked. We had this issue for quite a while now and representatives from Fuji rectify it temporarily. My knowledge on inkjet printers is that we need to troubleshoot them occasionally.. but for us we'd need...
  10. Iso propyl alcohol & adhesion

    Does IPA provide better adhesion when printing on glass or any other substrate ?
  11. Printing on veneers

    hello all, We have just bought the acuity advance select. We are printing on wooden veneer sheets. The print quality is good but the only problem is that the wooden veneer gets bent after the printing is done. Need few suggestions to avoid the bend.
  12. FUJI flat bed - plexi ink peeling problem

    Hey All! Just started at a new shop and they have a FUJI flat bed. It's an OCE just rebranded. They are having a problem with ink sticking to plexi glass. I never noticed a problem with the OCE at the old place. Plexi panels came and went very well. This particular job is a black text/white...
  13. Looking for PDF copy of Fujifilm Acuity Advance HS Standard Flatbed Manual.

    We are receiving this new printer (Fujifilm Acuity Advance HS) in a few weeks and could use a copy of the manual in advance to guarantee a smooth transition. I have called and e-mailed fuji but no luck yet. I have also scoured google to no avail Any help is very much appreciated.
  14. Fuji Acuity 2504 Z-Axis Issues

    Hello I am wondering if any other owners of this machine have any any similar issues with the Z-Axis failing quite regularly. After many service visits we have not been able to get down to the root of the issue after replacing controllers and the motors themselves. Fuji states the have not...
Top