help

Good morning everyone, I was wondering if the UCJV300-160 is capable of printing feather flag material, which I believe is polyester. I mainly do printing on vinyl and die cut decals with the machine and I'm not sure if the printer can Print on flag material. I use LUS-200 inks. Also is there...

Hello I can't figure out which font this is (the "TIME OUT" font). Can someone please help id it?

Hello All. I am running a Mimaki CJV 150-75 with CCMMYYKK SS21 inks. For the last year or so things have worked fine without much issue. Today we hooked up a Graphtec Plotter and it runs fine. Now any time I try to run a Print/Cut job on the Mimaki it fails. PS Interpreter Panic Error. I can...

We've been getting error code 16.13:10 for a few weeks now. We would restart the printer and it could be fine for a week and then pop up again. Yesterday we got the same code, so we took the front cover off and cleaned the dust out of the fans with canned air. There was A LOT in there. After we...

Hi! I have 2 heads that i think might need replacing, can anyone point me in the right direction? might be something else then new heads i need? I have changed the dampers and cap tops on all 6 heads. Any ideas? it is head 1 and 6 that have trouble, the rest print fine. ( i know yellow is...

I'm using FineCut8 on Illustrator (and have just downloaded FineCut9 trial to see if there's any difference, and there's not) When placing registration marks, the option to add intermediate registration marks is greyed out and unavailable to click... Any help or ideas on why this is happening &...

Hello, I'm having this error code 2320 and I have found the original producer error code list, but it is not listed. I replaced my wiper blade and yet I am still having my issue. It isn't allowing me to even move the carriage. Any advice?

HY guys I've just bought a used HP 360 LATEX but i can't find a way to connect it to the PC. I'm using Signature RIP and the printer is connect by ethernet to the PC. I've chosen an IP adress manualy on the printer/PC but nothing comes to the PC. I've also tried using automatic IP and default...

I recently had to replace the manifold adapter on my Mutoh 1204. Broke a damper nozzle while changing dampers. We did a complete flushing of the printhead, and everything seemed to be fine. We also replaced the maint. station (genuine Mutoh) and installed a new wiper. We printed with it for 3...

I have been using Arlon wall wrap material with an oragaurd 210 matt lam for my indoor wall wrap installations. I used the same material for my own indoor, and I am seeing that with all of my wall wraps there is a thin line of adhesive between each of my overlaps from the vinyl shrinking in to...

Does anyone have experience with the cwt express laminator? https://www.cwtworktoolsusa.com/cwt-express.html Or should I just buy the gfp 563th And if so why? First time buyer, main focus is for wraps. Any help would be appreciated

Just noticed I'm getting spots in my printing. I did recently replace the optimizer cartdridge. But I ran a print head cleaning. Any ideas why this is happening?

anyone fogured our how to reliably do this? I mean Hp has through their app but wondered how to do it directly from my phone. Not so much like sending new jobs but if I were somewhere and wanted to send a job I have already printed through production manager. On the other hand what if I wanted...

Hello, does anyone know which font this is? (the "poolsub.com" font) Please help! Thanks, Gabriel Aguilar

Having some issues getting this printer up and running. Roland Soljet Pro 2 SC-540 We bought it without the heads. It had been sitting, without heads for about a year before we purchased it. We replaced the heads, caps, dampers, all 3 pumps and lines from caps to pumps. I was able to draw ink...

Hi Guys, I need some help iv got a SP300v Iv had for years, they'v been brilliant but a few months ago I come back to work and it had emptied 2 of the ink cartridges all over the floor by where the waste bottle is. if its related the two ink cartridges were really hard to remove. I spoke to...

We are trying to narrow down our vinyl for wall graphics to around 5-10 different types. We have mainly been using Orajet with Oraguard lams. We've had a couple failures with it and are wanting to try some other brands/types and narrow it down to what we like that way in the proposal stage our...

I could really use some help here..for 8 years I worked in signage, and my CO2 laser was my best friend. Recently however, I started working at a print shop. For cutting stacks they have large cutting machines that rely on measurements and square corners. But as far as finishing cuts, mostly for...

Hello, I Have a Gerber Edge LE, and i am using flexi (cloud) and have been for 2 years and using it for single basic colors of cmyk seems to be doing OK but when i try to print full color images with it i seem to be having a lot of issues, i have quite a few different color foils mostly all...

Hey guys, this is my first post but I’ve gained a lot of knowledge on the forum from you guys. One of the things I’ve learned is the combo of a Summa S2 with HP Latex. I’ve been used to a Graphtec FC5100 for the past few years and it has never let me down. The S2 is a different story. I am...