l25500

For 3 months it's given us the 1.2:10 error message, which it says is a faulty Ink Supply System circuit board. However, if you ignored the message, it still always printed OK. Yesterday, it decided partway into a job that the substrate was loaded incorrectly, although there was 5 metres left...

After umpteen head cleanings, I'm happy with the shades of red/orange/yellow that the L25500 is printing. Ditto with the blues. Here is the odd thing: I make a box in Corel - X3 or X5 - no difference, in CMKY. Fill it with Corel process blue straight off the color menu - which equals cyan...

Despite a head cleaning, and head realignment, if I create a box of CMYK 0,0,100,0 (ie 100% yellow) and save it as a PDF from Corel Draw, then open it into Onyx Production House RIP, the yellow box prints with a dirty darker hue - not 100% yellow alone, but it seems to have murky black spots...

Hi Folks, I have an L25500 problem: nearly half the time I got to switch it on, it won't turn on. (via the button on the console at the front right. Am I the only one with this issue? Sometimes unplugging the 15 amp plugs at the back and replugging them helps - other times it does not. Any...

Hi Folks, after buying an HP L25500, (60"), the seller used Onyx as a rip and was keeping that for their next printer. Flexi was promoted as an affordable RIP for the HP L25500, but I cannot find any drivers in it, only one driver in Flexi for an L65500, which is extra narrow at about 1 metre...

Hello everyone, Can someone tell me how much more cycles can the HP latex L25500 perform after a Maintenance Kit 2 message has appeared? Thanks in advance

Strange request, but after deciding not to upgrade my l25500 for a new HP I decided to buy two more l25500's on ebay. Part of the purchase resulted in receiving extra printheads with the machines(expiration dates of 2017&2018) My problem is i have 5 M/LM, 4 Y/K and 1 C,LC Anyone out...

My printer shows a substrate jam, but the carriage is hitting the print head service cartridge. The cartridge doesn't seem to be moving far enough back. I have changed the cartridge, but still having problem. Any suggestions? Thanks in advance.

Hey everyone, We have a used L25500 that we've been using for a short while and had a couple of questions: 1) How do you know when a printhead needs to be replaced? The status is listed as "OK" for all printheads, but we've been getting some inconsistent prints lately (i.e. colors not printing...

So i printed the same image on my eco solvent printer using the same rip and orajet 3164 gloss and the image comes out bright and glossy when i print it on the Latex printer it looks good but not as bright and looks more matte then glossy am i missing something? does anyone have a profile they...

I can't get this L25500 to start up. The screen lights up with the rectangle and just sits there. Anyone see this before? Thanks

Hey Everyone, Hope you all are well. We have a HP L25500 that is out of warranty and just started giving us heat related error codes (14.08, 14.10 and 15.10). Does anyone know of a tech that could take a look at our printer — preferably someone in the Raleigh area. I've tried a few simple...

Hey everyone, I came in this morning and started printing a banner on our L25500. Everything was going fine, but it stopped mid-print and said something in regards to there not being enough power for the heating module. I took a look at the back of the printer and one module was flipped and the...

I am running a l25500 latex with Flexi as the ripper. I am running car wraps with seams that need to line up. When I print something at larger than 130" they are inconsistently not the right size printed. Off under and over by as much as 1.5". Not consistent. It is very strange too, because if I...

Everywhere I look online and in my HP manual says my test plot should look like this. Had and HP tech come out and look at our printer for other problems that he "fixed". Services performed were Service maintenance kit 3 and replaced our ink supply tubes and trailing cable. Had him take a look...

$9900 Includes FlexiSign Pro 11. Excellent condition. Low usage. Maintained by HP with my extended service contract, although hasn't needed much maintenance. Also have vinyls, papers, canvas & other substrates for this model. I also have a laminator, Graphtec cutter, Fletcher substrate cutter &...

Hello, Running HP L25500 with onyx 10. I am having colour problems after recalibrating profiles using the recalibrate button in onyx 10. Using the built in eye on the machine. Sometimes the profiles recalibrate fine and sometime the results are very dark across the board. The medias I am...

Two year old machine. Still has about one year of HP warranty left. In addition to everything that came with the machine, we have a 2" spindle. Some extra inks, print heads, maintenance cartridge, etc will be included. Buyer will need to provide or purchase RIP software to work this...

Wondering if anyone out there knows of a really thick paper or cardstock that can run through the L25500. Like playing card thick, if possible, as the project is making some one-sided mockup playing cards for a prototype. 12pt+ cover/110#+ cover preferable. Doesn't need to be exactly the same...

Hi folks, new to this forum and just hoping that some of you experts can help a brother out. We recently bought a LX850 with textile kit and a L2550. Up until now things have been fine although after two months in we are only now starting to put our 850 into any decent production runs. I am...