• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

laminating

  1. Laminator question

    I currently have a hand crank laminator (hoping to upgrade soon). I have to put a hard surface under my material before laminating. I can’t just put my print in and run it through bc it leaves a lot of bubbles. Is this just bc it is a cheap hand crank or am I doing something wrong?
  2. Laminating Bubble Issue

    Hey, iam pretty New to Signmaking and iam biting my theeth out with laminating, i mostly Produce motocross Graphics. I have a certain Issue which i cant get along, even my fellow technician from the Company i have my machines from cant help me. I have the Problem that when i laminate certain...
  3. Sheets/Roll Curling As Soon As You Laminate

    Has anyone experienced problems with the vinyl curling upwards as soon as you laminate the vinyl? This happens with both of my GFP Laminators. We tried: Loosening the tension to as low as possible and even tightened the pinch rollers 4 inches after they touch. Loosened the pinch roller 1...
  4. HP Latex 560 Print is Decreased in Size

    I swear if I could go back two years I would scream at my boss not to buy the HP Latex 560. *sigh* Okay. So, we've had this printer for over 2 years now and we are just running into a new issue and I need you guys' expertise before I go postal. We have not had any issues to date with the...
  5. Sled covering Non stick

    Hello, can anyone suggest a decent media for covering sleds for laminating? Looking for the best silicone -like, non-stick surface. My old supplier changed manufacturers and the newer product is sub-standard (everything sticks and I have to resurface sleds way to often) I was using a white...
  6. Table Top Laminating Machines

    I need to find a Company that makes the smaller table top style Laminating Machines that I can become a dealer for them and resell the machines to our customers. One particular Laminating sheet I am looking for is about 7 X 12 inches and has two slots in it for License Plates temporary tags to...
  7. Oraguard 372 installation

    Hi, I have a few I-bond sheet (1 meter x 1 meter) to cover with Oraguard 372 (you know, anti-graffiti film) and I can´t use a laminator. What´s the ideal way to do this? I did the first of them wet but it was not fun. The film is so thin... EDIT: Done.
  8. Question CWT Laminator Maintenance?

    Hey all - we have a laminating table from CWT that's a pretty heft piece of equipment and are looking for materials regarding maintenance. Not so much an issue as possibly the start of one - the rolling arm of this beast is gradually getting harder to push and pull as well as making more...
  9. Discussion Do I have to wait 24hrs so I can laminate?

    Just a quick question. A lot of people I have heard from say let the ink set and let the gasses release and wait 24hrs after print before coming to laminate? Is there a quicker way? My printer is a Mimaki CJV30 Thanks
  10. L260 heat and ink scratching off

    So we've had our 260 for over 2 years now. It is still a common problem for our prints to scratch very easily. I have pretty much maxxed out the Curing temp on this thing without it self combusting....what is everyone else running their cure heat at for everyday intermediate vinyl? Currently I...
  11. Perfect backlit faces

    This article was in Sign & Digital Graphics Magazine Making the Perfect Outdoor Backlit | Sign & Digital Graphics I understand how this would work perfectly but am a little confused about the laminating. If all this is going on the inside of the clear UV protected lexan, then why do you need...
  12. Question Laminating digitally printed vinyl with Rollover table

    We use a Rollover table for the majority of our vinyl work. However, we have a separate ProLam 60" laminator that we use to laminate our digitally printed vinyl (and plex panels). Has anyone used the Rollover table for laminating? I'll be using BriteLine luster laminate. I have a lot of work...
  13. I need advice with laminating

    I’m looking for some help, please. Recently I printed on 3M IJ180CV3 adhesive vinyl and laminated the prints. The printing was done on a Mimaki CJV 150-160 with Mimaki Inks. We allowed the printed vinyl to outgas for 48 hours before laminating. We then used a Seal 400 laminator to apply premium...
  14. Manually Laminating Vehicle Wraps... Is it possible to master?

    First post here... I've learned so much from this community already... thank you all. We're trying to do our first vehicle wrap and so far it's been VERY expensive. :-) I've ruined at least (at least) 200 sf of #3M IJ180 and the 8518 Overlam... ouch. After putting out the money for the new...
  15. Laminating Process

    We have been testing out different laminates in different thickness. But our main issue seems to be the drying time the prints needs before we can laminate them. Often we need to print something and then have it sent out that same day or early the next morning. Is there a way to speed up the...
  16. Seal 62 vs USCutter LightningLam

    I'm looking at a laminator, obviously. It is to complement my Mutoh 54" Valuejet I saw both the US Cutter Lightning Lam here: http://www.uscutter.com/USCutter-LightningLam-Lite-63-Heat-Assisted-Cold-Laminator and at Fellers 62 Base...
  17. ECO solvent ink printing without laminating?

    Hi, I'm newbie to forum. Have read a lot of post and I found theyare very helpful. I've been doing research and looking for a printer andink for color label printing. The label is self-adhesive vinyl and small size (2”). Icould get die-cut labels and hope for direct printing without coating...
  18. take up attachment for printer- Question about the media after print

    I am tired of pulling my prints out on the ground and rolling them up! I am going to get the attachment for my printer to catch the finished media- Heres my two questions: 1)I know its best to let the print to breathe and dry before laminating..I just started manually rolling these up and...
  19. Need some face mounting advice

    Hi, We are new to the business of face mounting images to acrylic. We are doing as small as 5x7-30x30 on 3/4" and as large as 24x40 to 30x90" on 1/4" optix. We are using a Diage 38" right now... totally have dust under control at this point but still seem to get bubbles. The bigger the print...
  20. lamex uv go laminate...or not??

    I am using a cold overlaminate (lamex uv go) with a GFP 463 laminator that heats the laminate... Is there a reccomended temperature for the cold laminate or should i turn the heat off all together?? PLEASE HELP
Top