mimaki

Hello, We are having problems with the plotter : Mimaki UCJV300-160. It is practically new and still covered by warranty. The dealer is, as yet, unable to help. A brief summary of our main problem is as follows: The plotter will not print red correctly, the hues are faded or worse, are altered...

Running Rasterlink 6 We are printing white over CMYK on clear. The CMYK lays down first and then rolls back to print the white layer. The white and CMYK don't align on feed, white being off by 2mm. Scan is okay. I've had cut issues with this printer as well. Sometimes it prints and cuts...

I have a Mimaki UV printer and use the LH100 ink and my dealer seems to be having a difficult time getting ink....... or is it just my dealer?

Anyone know/have any leads about the following? I've called mimaki USA directly and all things point towards a failed Main PCB assembly, so looking at final options: 1) a used (preferably)/new, confirmed working 3042HG Main PCB for sale 2) know of someone who can repair the USB connection (the...

I'm using mimaki uv printer (sij-320) and print out the result size which is fewer than the size that I want to print, especially I print long feed size of tarpolin.for example, I want print out 193" feed size but I print out the size is 192.5" which is less than 0.5 inch to actual size I want...

I wanted to see what your experiences have been to work with PDS Equipment for Mimaki equipment. Any feedback positive or negative is welcome. I want to gauge how the company is viewed from its customers... Not from the sales pitch. Thanks in advance!

Hello everyone. I’m looking to buy an old JV3-130 SP II Mimaki, and the owner sent me this picture of the nuzzle check. The printer has only 2 dx4 heads (CMYK). The printer did't print much in the past year. What do you think? Thanks.

Mimaki JV 33 - Been using ecosol inks. Works great. Replacing with a newer printer. Has been a work horse for us. Good for a back up printer or banner only printer. We use it everyday. We use Fuze Eco inks from Fellers. Been using them for several years. Nothing is broken on the unit or...

Our LUS 150 inks are becoming increasingly difficult to locate with acceptable expiration dates on the chips. We assume this is partially because of the supply chain disruption resulting from COVID and also that the LUS120 series if half the cost. We are considering migrating to a CMYKPPWW...

Hey guys, Does anyone have a problem with this message in Mimaki CJV 150-160? System Halt (1) 1b4:PCB SLDR2H-F2 It appears during the start. Thank you for any ideas about what could case this problem.

Hello, lost the original cd of finecut 8 and for upgrade to 9 is needed. Also even 8 cannot be installed. Any help?

Hi Everyone, I've got a mystery JV300 issue and this is actually the second time that this happened. Our JV300 is running the 2L sublimation bags and using Mimaki ink. About a year ago (1 month after the warranty expired of course) the yellow ink ran dry in both heads due to a incorrectly...

Hello, for three days I have had the same problem. I tried all the cleaning modes as well as the nozzles wash for 5 and 20 minutes. I also noticed an incorrect alignment on the MAGENTA. Please help me. Mimaki CJV150-160

My mimaki got error code system halt 1 1b7 COMIO CN27 How to fix it. where i can download jv150 service manual.

(P.S. That should be CG-SRii, not STii, but it won't let me edit the title) Firstly, it's a lovely plotter, and Finecut, operating from Win 7 was great too. (problems getting Win-10 to load Finecut, but that's no great issue- we just use an older PC instead.) But we bought the plotter with...

Hello, i want to buy a used DX5 printhead. No need to be perfect. Just want it for testing purposes

Hi, Anyone know of someone in north jersey area that can help with fixing small things in his spare time? (Mimaki cjv30-160) Thank you!

After not using my cjv30-160 for a month, The machine won’t print black or cyan. Looking for anyone private who could help with flushing the tubes or any other ideas. I hope it will not require a new print head. I’m located in Paramus NJ. Thank you!

Hello all, I am troubled. We had some fuzziness on a print yesterday. I figure it was from static. My boss suggested running a nozzle check, just to make sure. it was not good. We had quite a few missing pieces. No big chunks but a few here and here all over the print. So I ran a cleaning. Now...

Anyone come across this issue while using a Mimaki JFX200-2513 Printing on Foamex. Seems like a very rare issue any help would be apprecaited. :thumb: