mimaki

Our LUS 150 inks are becoming increasingly difficult to locate with acceptable expiration dates on the chips. We assume this is partially because of the supply chain disruption resulting from COVID and also that the LUS120 series if half the cost. We are considering migrating to a CMYKPPWW...

Hey guys, Does anyone have a problem with this message in Mimaki CJV 150-160? System Halt (1) 1b4:PCB SLDR2H-F2 It appears during the start. Thank you for any ideas about what could case this problem.

Hello, lost the original cd of finecut 8 and for upgrade to 9 is needed. Also even 8 cannot be installed. Any help?

Hi Everyone, I've got a mystery JV300 issue and this is actually the second time that this happened. Our JV300 is running the 2L sublimation bags and using Mimaki ink. About a year ago (1 month after the warranty expired of course) the yellow ink ran dry in both heads due to a incorrectly...

Hello, for three days I have had the same problem. I tried all the cleaning modes as well as the nozzles wash for 5 and 20 minutes. I also noticed an incorrect alignment on the MAGENTA. Please help me. Mimaki CJV150-160

My mimaki got error code system halt 1 1b7 COMIO CN27 How to fix it. where i can download jv150 service manual.

(P.S. That should be CG-SRii, not STii, but it won't let me edit the title) Firstly, it's a lovely plotter, and Finecut, operating from Win 7 was great too. (problems getting Win-10 to load Finecut, but that's no great issue- we just use an older PC instead.) But we bought the plotter with...

Hello, i want to buy a used DX5 printhead. No need to be perfect. Just want it for testing purposes

Hi, Anyone know of someone in north jersey area that can help with fixing small things in his spare time? (Mimaki cjv30-160) Thank you!

After not using my cjv30-160 for a month, The machine won’t print black or cyan. Looking for anyone private who could help with flushing the tubes or any other ideas. I hope it will not require a new print head. I’m located in Paramus NJ. Thank you!

Hello all, I am troubled. We had some fuzziness on a print yesterday. I figure it was from static. My boss suggested running a nozzle check, just to make sure. it was not good. We had quite a few missing pieces. No big chunks but a few here and here all over the print. So I ran a cleaning. Now...

Anyone come across this issue while using a Mimaki JFX200-2513 Printing on Foamex. Seems like a very rare issue any help would be apprecaited. :thumb:

Looking at selling my Mimaki JV3 130SL works fine Just don’t use it much. Had new heads installed last year. Have 4 brand new 1litre bottles CMYK ,STS brand ink to go with it. also have a plotter. Chinese. Have cut one sticker with it. Comes with everything. As new. 1350mm wide feed...

dusting printing Mimaki cjv150-160 bs4

Hello, we have a CJV150-160, this morning after detection the media, the head stop in front of the sensor and this message appears : " System Halt (2) 509 : HDC POSCNT " Can you help us please. thank you.

Hey guys, thank you for taking the time to read this. First off, just wanted to say thanks to everyone for their support and help. We are using a Mimaki CJV30-130 and I'm having trouble finding any parts catalog/mechanical drawing. The specific part(s) I am looking for right now is an entire...

I am printing 2 white layers beneath 1 CMYK layer on a Mimaki UJF-7151 Plus Flatbed printer. This printer is currently set up as Primer/White/CMYK (6 channels). I wonder if I had replaced the Primer channel with a 2nd white ink channel would I see a significant speed increase? I am using two...

Hello, I am a new member to this forum. I teach high engineering, graphic design and robotics. One of the things we do is run a small micro-business where kids design and then manufacturer products for themselves, parents and the district. We already own a Roland SG540 and we have used this...

Hi, I have a problem with my Mimaki CJV30-100. Want to cut squares of regular white sticker vinyl, size 199 x 199 mm. The easiest and quickest way to my knowledge is to draw that square in Illustrator and using the Fine Cut plugin to send it to the printer to cut. Works, but the final size of...

Hello, I have a CJV150-160, this morning I printed a file without problem, but after I had a problem, the printing starts perfectly and after 10 seconds it becomes blurred (photo attached). please help me solve this problem. Thank you