oracal

Hello Everyone, I currently use RTAPE 4075RLA TRANSFER TAPE - HIGH TACK for my transfer tape on Oracal 651. I usually have a few issues with the transfer tape not pulling the vinyl from the backing paper, but I am usually smart enough to work around it and manipulate the window cling to have...

Hello. So it seems ever since it started getting really chilly this winter we've begun having issues with our Orajet 3164m developing bubbles, before we even print onto it, and only partway into the roll too which is very inconvenient. We use an HP Latex 110. The room rarely gets below 40 even...

Hey Guys, Question for you all. I have a small sign shop in WV and have an in-house cutter but have always outsourced my prints mainly due to space restrictions at my location. I have a wholesale supplier for my intermediate vinyl prints but not for my cast stuff. (if you know of anybody...

We're preparing to install a wall graphic. We're using a high tack for the printed components. But, there is a broad purple stripe that makes better sense to use a calendered vinyl. The surface is engineered wood with flat paint. Anyone have experience with applying 651 to this type of surface...

Oracal sent me a printed sample of their new 3258 sticker/decal vinyl, stuff looks pretty good, but I'm more impressed with the print quality. Anyone have someone on the inside at Orcal that can find out what printer they used to print these samples on? Also, I can't tell if this is laminated...

I was recently looking areound for a good vinyl supplier that I can use. I ran across swingdesigns.com. Has anyone used them before? Are they reputable with good service? I just need a small roll of 751 turquoise and they are the only place that I’ve found so far that carries the small roll of...

So I have only experimented with Oracal 651. I have done small things with it like make cornhole boards and small window decals. I am getting ready to do my first big project for a gutter business. They have a four door pickup that they want their logo put on. They want it to run the length of...

Hi, I’m an establish artist (sculptural/painting/mix media) looking to try my hand at personalizing my vehicle with my own work. After doing some homework, I’ve decided I would like to hand paint my design on vinyl as opposed to directly on the vehicle itself. I intend to use One Shot paint...

Can't seem to find the right color recipe for Brimstone yellow, maybe different settings would help... any advice is appreciated

Hey Guys and Gals, I wanted to know everyone's preferences when it comes to traffic signs and what brand everyone likes using best, 3M, Avery or Oralite. Me personally I have been using 3M 3930 High Intensity Prismatic Sheeting, DG3 and Some engineer Grade. I have been in the traffic sign...

So I purchased a gerber edge as an entry level printer. Im very satisfied with the outputs, and what my current plans are for it. My question is I'm printing mostly on oracal 651 right now. That is 2.5 mil thick and it just seems too thin for application without tape, so I have been "laminating"...

Hi guys! I print removable wall decals with Orajet 3628 for interior walls, but just wondered if there were any cheaper material out there that would work just as good? Thanks in advance! Alexandra Lewis

We've lowered the prices on all of our 24" Oracal 651 and GT5 Intermediate Vinyl! Don't miss out on these savings! Shop now at www.hhsignsupply.com

I looking for a roll cutable, conformable stencil material for airbrushing. Not Oracal.

Full wrap on a Toyota Tacoma. Used Oracal wrap vinyl & overlam, printed on a Roland Soljet III xc-540.

Our latest wrap - a box truck wrap for a bike shop. Printed on Oracal wrap vinyl with a Roland Soljet III XC-540. 1/2" overlap on the panels. Love installing on flat surfaces!

we recently switch from 3M to Oracal digital vinyls. Instead of using IJ35c , now we are printing on 3165GRA. need to know Which Oracal vinal is equivalent to 3M IJ40C, so we can switch that also.

We have been having considerable difficulty finding a good vinyl for the deep channels on a Nissan NV cargo van. We are doing a full wrap (roof and all) have tried Avery 1005 (with pre and post heating exactly per Avery's specs), Arlon 6000, and Oracal 3751. So far, the Oracal seems the best...

Hello Guys I am a decal maker from India and we really have lots of problems importing the Oracal series in India. If anybody can help find a good supplier it would be highly appreciated. We end up paying lots of money to the importers here thereby increasing our costs. My question is about...

I'm done with 3M. I hope your entire company reads this. I just lost a massive fleet job thanks to your original wraps add in. A very regular customer of mine had Many vehicles to get done, and the dealership offered him a very attractive leasing option to get them wrapped through them. He was...