signlab

HY We got an old gerber with an old windows XP including flexisign 8, i've been printing a few meters with the edge but i definitly find it hard to set and i've heard that Signlab pro with the thermal module allows to produce a lot more than the flexi software in a much easier way. Does anyone...

Please Delete thread. Problem solved

Hello, been using signlab for 13 years and never any issues. Recently our summa has been doing some strange things and it has been suggested it is a signlab issue as cc is fine. I do not run the plotters anymore it’s someone new but am told once an object selected, press cut as normal the...

I am running a roland versacam sp300V, I want to upgrade computers and software, I have been running flexi 7.6 on a windows 7, 32 bit computer. but new computer will not allow the security key to install?? but the software installs fine. installed corel, prints nice but adding inside/outside...

I just upgraded the internet to Spectrums 400/20 which meant a new model and router from Spectrum. Since I installed it I can’t print to my Mutoh VJ from my desktop. Keep in mind the desktop goes into a Netgear switch and then out to the printer via Either net cable. I did check the IP address...

Seeing if anyone else is in this position and what's the best way to make it work. For years have been running SignLab 9 with VersaWorks on a VS540. I added a Roland VG2 and it won't run with VersaWorks that comes with SignLab 9. So I added VersaWorks 6. After using the SignLab built-in link...

With the new updates in DesignPro 10, objects just started moving up to the top of the page when selected. I know there's an easy fix as we had this issue several years ago with a previous update. Does anyone know how to make this stop? Thanks!

I have had Signlab for over 20 years and never had a problem. My computer hard drive crashed and I had to buy a new computer. The new computer has Win 10 , I had to upgrade the Signlab to 10. The old version I was using was Signlab 7 and would not work with the Win 10 computer. I have been down...

Anyone know the equivalent font to SignLab's Conkerr.vef?

Hi there, We are running Signlab 10 and Rasterlink 5.16. We have been able to print & cut just fine up until recently. We can get everything to send from Signlab to Rasterlink and it will print like normal. When it goes to cut, we can get it to find the registration marks, but as soon as...

Ginsu knife has mind of its own. I am using open path icon but it still creates closed paths. I can't figure out why this makes sense? Any advice appreciated!

Hi guys im new to the printing game, I have taken over a small company printing motocross graphics. Anyway the pc we use to run signlab 9 on is old and rubbish, ive got a better pc ive put the software on it and inserted the dongle. but when I come to run the software it says I only have a 30...

I have Signlab 10.0 Print & Cut, Cadlinks newest version of Signlab, Top Of the Line software. New in the box, Installation DVD, security dongle and manual. Cadlinks Price right now until the end of februari is $2,750. Get this at a great price and save big time only $2,350. If you're...

I am trying to set to scale a group of objects in SignLab using the measurements of one smaller object. If I get the size of the overall its easy. But sometimes I am asked to scale with only a single measurement on a smaller object within this group. Is this possible? Thank you! Tom

Need some help understanding why my co-workers prints get this mysterious line but I don't. We use the same printer but different computers. We use Versaworks on a roland vesacamm 540. If you have seen this problem & fixed it, please help. Since I don't get the line, cleaning is not the problem...

Hi everyone, and thank you for allowing me to be a part of the community! ok my question, is there a way to set a job up for perf cut? its a pain to send job to illustrator to add the perf cut line so im wondering if there is a way to do it right in signlab? i use signlab 9.1 print & cut, and...

Hey Guys, I just had to re-install signlab after a previous computer died just wondering if anyone the same issue the dialog boxes are massive.... Cheers Cheyne

Sign shop including equipment,fittings and client list,established 1998 for sale-owner retiring. Items for sale: Mimaki JV 3 SPII 54" large format printer with bulk ink supply,Onyx Production House,X-Rite eye-one pro color profiler,Daige Quik-Mount 3 Laminator,Roland Cam 1 Pro 24" plotter and...

Good morning! One of our computers finally kicked the bucket yesterday. The problem is that it was running Signlab 5.0 (Rev 12) to connect to our plotter. Embarrassingly old, I know. I have the dongle, font disk, manuals, everything except the install disc. Do any of you happen to have a...

We are working on setting up the new setup, with S.L. 9.1, using the Rasterlink plug in...and plotting using production manager.... we have it all working except when it plots it seems to do so about .25" off... can not figure out why... anyone using this that can assist or share any tricks...