test print

Just occurred this evening, cyan or lt cyan drip on test print same spot each test. The light cyan dropout has been there for a while and think it might be the cyan head. Anyone see this before with the test print little pool of blue being dragged? Captops are in good shape and just changed the...

Can anybody maybe help us with this problem. It continues to happen no matter what we try. We've tried doing powerful cleans but nothing helps. We are using the Roland versacamm vs-540

Hello All ! Machine - Mamaki cjv30-100 My black disappeared mid print which i suspected was the damper, it was late at night so i just set my head to soak overnight and when i came to change the damper in the morning my yellow had also gone. i swapped dampers on both and but only my black has...

I changec caps and dampers, but in the test print there ir no cyan. Does someone knows something about it?

Hello guys, I own a VP 300 and last morning the magenta and yellow head wouln't fire any ink. As we have had power cuts 2 days before i 've conclued to broken print heads so decided to replace both. But after replace the yellow one and tried a TEST PRINT, black and blue ink came out from the...

I'm getting strange results from the service mode test print (see attached). Cyan seems fine in the standard test print, but when printed in service mode it has a wavy column with light coverage in the middle of each pass. Has anyone ever seen something like this? Cyan is showing signs of ink...

The picture says it all. This was a test print done immediately after manually cleaning the heads. Prints are still coming out looking fine though. How can I fix this? Roland VG-640 Nozzle Check Problem by rdgPrinter posted Oct 5, 2017 at 8:59 AM

This test print is from the service mode more detailed. As you can see there are waves in the Cyan causing slight blurring in actual prints. Fix? or head replacement. Fairly newer head about 9 months no strikes.Regular test print looks good.. any help?

Hello All, I just replaced my black/cyan print head, and now when I do a test print I am getting two sets of Magenta and Yellow printing! Image attached. I have done numerous power cleans, and have even syringed ink through the lines (to no avail). Any suggestions - would be welcome. Image attached.

This is a test print from the Roland XC540 Pro III - I had changed out the LM and LC Print Heads, replaced all of the card cables between the Head Board and the Carriage board and the Carriage Board and the actual heads. The heads that were giving me a problem are performing beautiful, as well...

Hi, all! Hope you can help. I'm running an XC-540, and when I run a test print, everything looks normal except that half of the magenta pattern just doesn't print. Anyone seen this before? Thanks!

Hello, i am hoping i can get some advice from someone/anyone! I'm attaching my test print for my 54'' roland sj 540. I've only had this printer for about 8 months. The previous owner used only roland inks and the test prints were just about perfect. I've since switched to using Triangle Inks...

Hi there, I have a Roland XJ 740 and all in all works pretty well. However, the cyan and/or light cyan print head may need to be replaced and I would like to know if there is a way I can: 1.- Avoid having to pay the high service fees of my local technician to come and tell me something any of...

Hi everybody. I wanted to ask you if anyone experienced this and how do we go about fixing this problem. please note that i'm not an expert of this but i'l try my best to follow any instructions you throw at me..so please I really need help.. by the way, here's the testrpint:

Hi All, We've recently had our Mimaki JV3 160SP completely crash. We sent our mainboard in to Mac Media and they quickly fixed and sent back to us. The printer has been working well all week, except for the fans which I fixed by replacing the cable from the IO2 to the Mainboard. After replacing...

Anybody ever see anything like this problem? Please see attachment. I just put in a used board. The magenta prints all over the place, except for where it's supposed to. Thanks for any help you can give. Jeff Dream-A-Sign

Hi Folks, I'm looking at buying a SP540V. It's set up with bulk ink system CISS since new, and with the Aussie Mimaki inks since new, not the Roland inks, but it's always been like that. The problem I have it is's 9 hours drive away, and the seller has not got a clue how to get it to print...

Hi, You will find attached the test print, please help me to solve this problem.

After a couple of cleanings and manual cleanings. How much trouble am I in?? When there's deflection like in the Black and Cyan test print is it curable or do you have to replace? Also the wavy portion on the magenta just started happening. Thanks for any help!

Hi Guys. We have a JV3 160sp. We recently had a new black head put in by Blueprint Imageing NZ. Perfect test print. Then the following day we get this from the black head. Is it buggered already? Or could some settings be wrong? I manually clean the machine every other day. Nozzle wash 3-4...