• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

white

  1. Need Help Mimaki UCJV300-160 PULL BACK AFTER PRINT: White Ink Out of Alignment (COLOR -> SPECIAL COLOR)

    It's pretty fine when printing "simultaneously" but unfortunately, in order to print white and glossy clear in the same job, you need to first print the white underlayer, and then the top color and clear gloss in the "color -> special color". Is there any way to make gloss work with the...
  2. How to White Flood Only Part of a Print with Onyx on HP FB750

    I use a Scitex FB750 with Onyx rip software. I'm trying to figure out how to underflood only a portion of an image. I've attached a screenshot of the file I'm trying to accomplish this with. The portion outlined in red has a solid spot color behind it. I need that to underflood, but I need the...
  3. Gradient white print out of Rasterlink??

    Until ONYX decides to figure out how to get us printing cmyk+w on our new UCJV we're stuck using rasterlink. I'd like to meet the people that created this software and have a few words with them....but I digress. Honestly it's insulting using this software after using Versaworks for 11 years...
  4. Epson s80600 printing off white and or cream? Help

    I have an epson s80 Printing way is pretty straightforward, you have to make a swatch in illustrator or whatever vector-based program you’re using that says “Spot1”. I have done so and gotten the printer to print a beautiful gradient along with white grass. The challenge today was I am trying to...
  5. White plate printing too large

    I am printing on a Mimaki JFX200. If I send a jpeg photo directly to Rasterlink and create a white plate (valid pixel) behind it the white prints exactly the same size as I photo. If I place the same photo into a Photoshop file, flatten, save as a pdf and send it to Rasterlink the white plate...
  6. Question versaworks print white and gloss in one pass

    On the lef-200 i want to print white-image-gloss in one pass. Can this be done simultaneously ?
  7. How to print in white on HP FB750

    I read some instructions online about setting up a file to print white. It said to create a "white" swatch and set it to "spot color", and that it wouldn't matter if it was actually white. They used magenta so it would be visible on the art board. My understanding was that it would translate as...
  8. Need Help Printing White on JV33

    Hi everyone hope someone can point me in the right direction, I have 2 JV33 printers, I would like to use one of them too print white on Clear, can this be done on a JV33 or am I dreaming?
  9. Question Print white and color at the same time?

    Hi Would it be possible to make a solid list of good RIP softwares that allow white and color printing in one single pass? The only software that I know able to do this is WhiteRIP which is a good software with very nice features and a SINCROPRINT option that allow white base and color...
  10. Laser engraved acrylic

    Looking for a vendor for laser engraved acrylic. What we are looking to have done are 5"x2.625"x 1/16" layered acrylic, black bottom, white top. Some text will need to be engraved so that the background is black and text is white. Also UID data codes need to be engraved in the same way...
  11. Reflection Print

    Calling all digital print wizards, I'm wondering if this type of print is possible, and will look good, if done on clear? White flood coat then print. The hard part would be getting the gradient in the reflection to look good. Client really wants a reflection, and it's the only thing I can...
  12. LED Strip Problem

    I used 5050SMD Cool White water proof led strip to lighten up 6' x 2' white plastic sign board with cladding sheet back of the board I used 15M (3Rolls) to do this because these cheap led strip not bright enough. i fit this led strip every 2 inch space horizontaly Every thing worked fine for...
  13. Question Help with factory instlall Vinyl Window Pillar

    Hey Everyone, I opened my door today and did not realize how close I was to the cement pillar. In the end it looks like I ripped the vinyl they use on the window frame. It is very small and not worried about the white underneath as that is the paint on my car rather than the frame. All...
  14. Mimaki JF 1631 - cyan/pink drift on whites and grays

    Hello I am trying to print some grayscale images and there seems to be a cyan or oink drift left behind on all white areas of the image. What might cause this?
  15. Everyone has been asking........................................

    So here goes. I've been hearing a lotta complaints about not enough sign layout or designs being posted lately, so I thought I'd post up some we've done recently which is in conjunction with our 'Summer End Sale'. We run this special usually at the end of summer, to stimulate some business...
  16. What is the interior color of your office?

    Hi Signs101, For 20 years our interior office has white walls, white ceiling, and white painted brick, I AM TIRED OF IT! We have a painting coming in next week and I would like your suggestions for what colors look great on your office. For reference we our office is roughly 30' x 30' and we...
  17. White vinyl

    Does anyone have a manufacturer and part number for the brightest white self-adhesive vinyl? Thanks
  18. UJF 3042FX White ink isn't opaque enough

    Anyone else have this issue? Running 2 overprints, White comes out blueish gray. I have LF-200 ink installed and I'm printing on a black substrate.
  19. Best Method to remove yellowish laser cut edge from 1/8 white Polycarbonate?

    I searched google, youtube, and this site and could only find one video that shows the yellow stain left on polycarbonate after it is laser cut. here is a screen grab from that video: my question is what is the best way to remove this yellow stain? I will be using white polycarbonate and don't...
  20. Font Help Can Anyone ID This Font Please?

    I'm needing to ID the white font in the picture. Thanks John
Top