zund

Our company just upgraded to Onyx Thrive and we got a new Zund about a year ago that uses Zund Cut Center, we use two seperate computers for Onyx and Zund. So far I have been able to have Onyx print a file that was set up with cutlines, then print with a QR code and registration dots, the only...

Hello all, Is there someone who can tell me the best way to install the V-cut tool on a Zund for cutting 10mm honeycomb board? Sometimes it’s to deep and sometimes to high, sometimes the edge is more than 90 degrees. How is you experience with this and which parameters do you use?

Hello Folks, I've recently been looking into purchasing a flatbed cutter for my sign / print shop. I'm looking for something that can manage at least 4'x8' sheets of material (aluminum composite, posters, banners, etc.), but the prices machines like the SUMMA and ZUND are way out of budget. I'm...

We have a 2005 Zund M-800CV for sale. This is the Conveyor style so it will cut unlimited length files. Can be configured for any application desired for any cutting material. It has a camera setup available to read crop marks. Asking $15,000 or best offer. Free to come and inspect and take a...

Hello all, I have a really frustrating issue, the zund won't cut to the reference point I set, I think its because its not using the laser as the point, its using the tool, I found where to switch that over via the zund manual but for some reason I get to the final steps and the manual doesn't...

Hey everyone, I have never had this issue before but I've been clearing and changing the alignment to 0 before setting any reference points, then I'll manually enter it through the Zund panel, but it still cuts off of the reference point each time, I even do a laser simulation to check its...

Zund l2500cv error code I have a question error code - 342 (AC Fault Polarity Y-Axis) error code - 312 (AC Fault Check Axis) error code - 307 (AC Fault Check AC) Do any of you have the same experience? May I know what the problem is?? I wonder if it is possible to purchase parts from overseas.

HY We are interested into buying a FC2250 equivalent flatbed plotter. We would be grateful if any member would send an offer. Thanks for watching. Regards Franck

I'm shopping for a finishing table that will work in a building with only single phase power. The specs on the Colex Sharpcut fill the need.

The issue we're having is with Onyx rotating the cut file without us knowing. I can't find a pattern, as it doesn't always do it, but it only occurs when we have Onyx add the cut path to the file in preflight. It also doesn't seem to matter which printer we use (flatbed, latex, solvent, etc)...

We are selling our Zund M-1600 with Camera and Dual Tangential Knife Blade Head (this is the non-conveyor version). First $10k OBO cash gets it. Pick up Indiana. Excellent condition with very very low hours and serviced by Zund directly. Everything works and is super clean. Cut Area is approx...

Hi we recently purchased a mimaki jfx 200-2513. print wise everything prints and looks amazing. but we are having issues trying to cut foam pvc aka foamex. when we print and cut or even leave to harden off for a few days the edges are chipping away, only slightly on the edge but you can see it...

I recently switched to flexi (19) because the onyx upgrade is extortion. The Cut integration with the Zund Cut-centre was seamless in Onyx. Flexi makes a complete mess of the nested cut files and support is not helping much. Has any one experience these kind of errors. Flexi PM 19 is clearly...

Hi all... I'm looking at adding a flatbed cutter to my kit (Circa $100k AUD / $70k USD). Have researched Zund, Esko, Gerber MCT, Summa and various other machines on the market. Trying to weigh up our possibilities of our existing sticker production, being perf cut on our Roland GR-640 (Hit and...

FireSprint is a wholesale screen and digital sign printer for the trade. We offer high-quality coroplast, foam board, aluminum, ACM, vinyl and more. Services We Offer: Graphic UV Screen Printing (48x36" maximum) Digital UV Flatbed Printing Rigid Substrates up to 8ft x 10ft or longer Digital...

Hi All, Have someone experience in the Grafitroniks Cut (aka. GTK CUT) software? We just get an used PN series ZÜND machine (with this software), but we havent any knowledge in the software. Of course, I dont want it free of charge. Thanks in advance, GregK

Where: PIP Marketing/Signs/Print 8325 N. Allen Road Peoria, IL 61615 Position Overview: This a production position using the latest in printing and CNC router technology. You will be printing, cutting, routing, and installing all kinds of things. No two days will be the same that is for sure...

In Search of Sign Shop to buy. Looking for a shop going out of business or one looking to get rid of old equipment that is in good condition. Wanting to buy all the equipment and tools needed to start a successful sign shop. Hoping to find all tools and equipment in one place. Preferred...

I'm just wondering if anyone is using a zund and what blades everyone is using for different materials, foamex, card, paper, banner, etc. the main blades we use are a standard type 6 and a z17 but theres lots we have not tried. is there any better ones we should have? thanks in advance

We have a Kongsberg XL44 and need to add a new digital cutting machine due to our increase in jobs to cut. We are looking at a DYSS due to the price point and machine capabilities. Does anyone have good/negative experience with these machines and service. Are they reliable? We are looking at...