Search results

I had my first experience with the "oily" film on a rush job this weekend but to be honest I'd have to account it to operator error, I feel like I need to tweak the heat/cure settings until I find that sweet spot. We upgraded to the L25500 from our Roland SP-540v and I'd have to say we are...

Thanks for the replies everyone! DRamm76 off the top of your head do you know how to get the shot count on each head? My tech did it for me over a year and a half ago but he's no longer a tech for that supplier and his replacement had no idea what I was talking about, needless to say they're...

You're correct, the SP does have those same as the VP. The wiper scraper is new within the last 2 weeks (changed from the clear one that was the original to the new black one Roland supplies, don't know if that would matter they look identical other than color). Wipers are also new, they were...

Hi Sign Guys & Gals! Hope everyone is having a nice weekend! I've got my Sp540V that I've been running for 3 years now. Up until lately its ran great but it feels like it's on the decline as of the last week. It runs regularly, is set up to do automatic cleanings twice a day and I do a manual...

Hi Sign Gals & Guys! Another font ID I can't come up with...thanks in advance! -Nathan

I've had similar issues on a Sp540V from Versaworks. I do as you say and in VW it shows the job under print status at 0% then disappears as if it's finished. I've gotten it to cut by turning off the power on the front panel, turning off the main power on the side and unplugging for a minute...

Thank you guys very much!...very correct poor little fella had been squished beyond reason! -Nathan

First let me apologize for the low res camera phone picture. Gal asked to have some simple letters re-done on a banner, no problem right? Except I am coming up empty handed on a font id. Any help is appreciated! Thanks! -Nate

Pat's right on this one, the age is a huge hurdle. Being 20 I face the same setbacks, usually when I walk into a business and introduce myself I'm instantly written off. Educating potential customers on the fact that it's your business and you take pride in what you do can prove to be extremely...

Hi Signs101'ers! I did a search with no luck, I may not be putting the correct terms but I was hoping I'd strike gold with a new thread. I've got a 40" x 120" piece of 3mm Polymetal that I'm preparing to hang. It's going into an extremely smooth stucco building so I'm not opposed to using...

Once again hello guys and gals of signs101. Flicked through my fonts and have no matches for this one at all. Any ideas? -Nate

As always spot on!...thanks Fred! -Nathan

Hi Guys and Gals, Seems really simple, but I'm drawing a blank on the font below, I apologize for the crappy phone picture! -Nathan

Hi Guys & Gals! I had a customer email me this piece of clipart and ask if we could install it on the back doors of a van. I know I've seen similar clipart, I checked ExpressClipart first with little luck and now I'm at a standstill. I may end up trying to pen it out myself but I thought I'd...

I would go over the original panel if it was up to me as long as the existing panel was a fairly fresh install. -Nathan

No sure what machine you're on but I just flipped through my machine (SP540V) and had no luck finding the option I was thinking of but on another machine I ran (Soljet SC540) I know under the menu there was an option for "Periodic Cleaning". If this is enabled it allows the machine to do just...

If you are like I am, I start thinking about touching my print heads and I get sweaty and began convulsing out of control! All joking aside if you want to do a few extra steps there's a slightly easier way that involves parking the head. If you take off the panel and expose the cap tops, then...

I know on my SP-540V if I don't have some slack it will pull vinyl through but it sounds very harsh and makes me sick to think of the unnecessary wear it's causing. Have you tried the prefeed option? If not go into the menu, mouse down until you find Prefeed, click into it and you'll see you...

hmm I was mistaken I wasn't able to change mine either. Do you know what your heat/dry settings were at? Also what material are you printing on?

when you say halftones are greyed out i assume you're talking about in versaworks? If so are you getting to the options by double clicking your job or by clicking the que a (or b) folder at the top? This may make a difference, I know you can convert spot colors on a job before it's loaded but...