Search results

if its a new printer you have a warranty..if the head failed before 1000ml printed HP will send you a new one out overnite. call hp or your reseller(if they provide service) they can walk you though any tricks in the service menu to get you running today. I would try to fill flop the heads if...

what are you looking for? there is a t shirt printing forum

start with a cap...order a syringe as well...good to have on hand

315 and 115 are identical except for ink cartridges...there is one from supply 55 that will work but I'd buy the HP

The Leister is a quality product for the money. Its like any tool, only useful if you take the time to learn how to use it. We picked one up at last year used it a few times then found our business changing from banner to direct board and apparel.

there is a known issue with bad ink and FB's now for about 6 months. The tech that charged 10k for service...why wouldn't he have sold you a parts contract? comes with 4 heads and covers all parts for a year...labor not included...you had a bad ink issue, imo did they credit you back the 10k in...

what media are you printing on? Is there a profile available for download? if so use it but run a color calibration to linearize it to your environment. I am assuming you are using HP branded ink and not 3rd party. If you are creating a new profile from scratch, I have the printer set up the...

do yourself a favor and confirm your power. take the panel cover off you breaker box...send a file to the printer. Have your meters on before the file is submitted and watch the numbers...if you are going above 230v or spiking, the issue is at the source. You may want to invest in a buck booster...

I know Peachtree makes accounting software...

you are running onyx. put both printers on onyx. Start with one rip. Download canned profiles direct to units and run the color calibration through Onyx. Send the same files/resolution/passmode. You should be in the same ballpark. Load your cutter into cut server...now you can print cut from...

and....let your rip be just that. a rip....have a separate pc for design...photoshop is a power hog

your processor is for a mobile device...this video shows the desktop version. the smaller chassis in the laptop will cause the chip to overheat faster...causing it to automatically slow down so it does not blow up. just my opinion....after installing and servicing onyx, versa works, color...

just sent you an email...

all that horsepower only necessary when editing 4k videos and music...iMac Pro with 32gb ram and i7 processor is all u need

old material...plasticizer migration... first one may be too much heat/ink combo

The only time I've ever seen a summa cut that far off is if you are trying to rotate the cut file in cut server....that does not work and will corrupt the file or if the material is loaded the wrong way.

You need to improve dot gain for adhesion. Lamp power does not do this. Male sure trailing lamp is set to shuttered for whatever mode you are running. If you want to test the media, clean a portion with 70% alcohol let it dry and re-run. If the ink adheres better in the cleaned area then its the...

$475 for parts and about 2 hours for tech to service. The heater assembly will be pulled off of the front of the printer during service to be cleaned.

I would do 2 s40s before 1 s60...there are more profiles available for the s40 and you have more flexibility with a second unit. The 570 with bulk ink is a nice option...I have the 560 now.... I personally would not take a new printer and throw third part inks into it. Voids the warranty on...

agree with take up reel as well as banner felt guards. Have you had pm svc 2 performed yet? All of the air nozzles inside the heater are cleaned...that airflow helps keep media where it belongs