Search results

It seems that if you were to get a flat bed / roll to roll you could be doing everything but the actual wrapping and cut off your competition.

If you are looking for a spot - up light you might need to wire up your own.

Bots, name is not too important seems like you know what you want to do so stick with it, too many haters out there to watch out for. It will all come around hey we all learned it some how except that one guy on that forum that makes fun of everybody since he is a pro from day 1. hahaha.

You can try Gemini, precision tooled with paint fill.

You'll always be underbid no matter what the situation is. I'm in the neighborhood if you do 3 or 4 at a time.

Hooks and Lattice

You can use some angle clips and bolt together you will need it to be spaced of a bit to be even from the stone.

Depending on your RIP or print software you should be able to do a double strike print, what we normally do is a double print and if you search the forum you will find this topic mentioned before.

I think for the most part regular wear and tear we use it 2 shift 24 hrs 6 days a week.

One of them is the 26 not the ace, that one only bend 3-5in. coil in .040 regular letters. The full version Adams is nice but almost twice the cost of the 26, works good. Clincher ok does breakdown.

All you can do is like you did by digging up some dirt on the web, there are a few sites were this topic has came up. I think there are 2 brands you should be looking at 1 is Adam Tech and Accubend they are very similar in price for the basic models and its going to depend on what you need it...

If you have no other alternative, you could try 1shot or Field masters you can roller them.

Yeah, only aluminum up to .080. For acm I would route on a cnc or like someone else mentioned make a template out of acrylic, mdf or mdo. I made one about 12" x 12" and each corner I made with a different radius. 1/2" - 2". VHB it to the panel and route on a table router.

2B, I have one of those punches and they work great. Just stick it on an Arbor hand press. It actually has 4 different sizes in one punch. I would recommend it. I have done both cnc the radius panels and hand route with a jig and router but this is faster specially if you are doing quiet a few...

I think you can get a starter low budget cutter and heat press from US cutters for what you want to do. Yeah it might not compare to a Graphtec or Roland but 10 - 20 shirts shouldn't be a problem, just remember you been in the business and bought equipment that you said to yourself I should have...

Sign Mart has a great selection but they are on the other side of the country. You could buy in bulk and order them from China if you have a lot of demand. Best bet is keep looking for a wholesaler in your area. If you are doing 1 or 2 agents here and there might not be good but if you are doing...

Gordmanca, we add a kicker to the bracing at least 4" from the face so it's eliminated the shadows.

I believe he needs to reface a sign with radius corner, we usually get the size of the cabinet you do not need to rub the entire face. You need the retainer size for your face to fit and if you do not know how to measure a radius the rub the retainer corner and have your designer lay it out for you.

You can do it both ways, if you do not have a flat bed printer you can go with the reverse print on the inside we usually do a double print to enhance the colors when they are lit, and apply white translucent vinyl lastly.

There's your info wood and metal oh and 5" number. Copythat if you never done this type of work. You need to be a little more specific in order to get some help. Is the background stainless steel with a brushed finish, is the metal mounted on the wood you aren't showing it and is the number...