Search results

Have you tried White lightning silicone?

Are you referring to the Chevy van 20 logo on the side?

Are you doing a cast plaque or just a panel with cut out letters you can easily roll or bent ACM if not an .063 panel with standoffs if the radius is not to sharp. The panel is not to big might be able to mount it straight.

You could get another small printer for shirts only like the BN-20?

Maybe try looking at a company like Data Graphics they produce numbered UL Labels that are tampered proof in a roll?

Well with that said, I should be charging 3x that price since we are in CA with the highest prices in gas almost. :noway:

Might want to try Outwater Plastics.

Hello, we are looking to get a Vutek flatbed printer to print and thermoform pan faces. I see EFI has ink specially for this application and I wanted to see if anyone if familiar or seen this and how effective is it. Will the illumination be acceptable? Oce was coming out with something similar...

If you use white, can't you direct print the grey background as well?

Hello Alex242, is $12.000 pesos Chilenos or US dollars? Is dollars you should not put a period but a comma. If you are the person that operates the equipment on a daily base you should get a good idea if it will last a couple more for it to payoff. Can you buy a new printer if you wanted to...

You are probably going to get that with most vinyl, we use 3m and metalmark. We try not to contour cut it for the same reason, with a white back ground we would print it edge to edge, or laminate it with a clear that is 1/8" oversize wet application on the face.

Even with an estimating system, you need to know what it involves materials and labor. What you G&A is so you can figure out your mark ups and potential profit.

I had a similar issue, but it only happened with round shapes straight lines were fine, so I had play maybe figured it was similar thing.

Hello Ryan, Bly quoted last month; It's like any other sign. Cost of materials + markup. Installation & prep time x shop rate. Design time if you're doing the design. Even if you're not you should allow time for artwork setup, dealing with the client etc We photograph most jobs and overlay the...

Roper has a larger model with longer neck if you ever decide to make weep holes for channel letters. I also have a simpler model I ordered through amazon that's lighter than the Roper, but works great on .040 and .063 blanks.

I believe AGI is the only approved vendor for GM signage.

I found some 4 mil microporous clear film, it looks like a positive film but in a roll. I found it at Read & Co Supplies.

You should start by testing out some squares and circles, there might be some play in your stepper or gantry.

Maybe if you said what kind of material you are trying to cut, cardboard, styrene, polycarbonate or pvc. Like everyone else said I don't think you are going to achieve this with a plotter maybe on a cnc with a drag knife if its not routable? I'm sure whatever it is that you are making you can...

Hello, you can check out Stahls', you can get printed heat transfer material and get a better idea of what you might need if you don't have a printer of your own.